{"title":"LCDs \u0026 Displays","description":"\u003cp\u003eBrowse our LCDs \u0026amp; Displays collection. New Arrival.\u003c\/p\u003e","products":[{"product_id":"hdmi-4-pi-101-display-1280x800-ips-hdmivgantscpal-discontinued","title":"HDMI 4 Pi - 10.1\" Display 1280x800 IPS - HDMI\/VGA\/NTSC\/PAL [Discontinued]","description":"\u003cp\u003eYes, this is a beautiful bright 10.1\" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10\" diagonal and is a 'raw' display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect a 9-12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voila, a display!\u003cbr\u003e\u003cbr\u003eThere's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.\u003cbr\u003e\u003cbr\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC\/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.\u003cbr\u003e\u003cbr\u003eFor use with a Raspberry Pi we suggest editing \u003cstrong\u003econfig.txt\u003c\/strong\u003e to set the HDMI to 1280x800 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save. For use with a BeagleBone black, we found it works when plugged in, no configuration required.\u003cbr\u003e\u003cbr\u003eA power adapter is NO LONGER included. You will need to either purchase a 9-12VDC adapter or you can use one you've already got around the house.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note \u003c\/strong\u003ethere is a thin protective plastic film on the display, which may be lightly scratched or fogged. You need to remove the film with a fingernail or plastic wedge if you want to have the most beautiful display!\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eHDMI\/VGA\/NTSC\/PAL Display - 10.1\" Diagonal - 1280x800 IPS (1:12)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDriver Datasheet\u003c\/li\u003e\n\u003cli\u003eKeyboard Datasheet\u003c\/li\u003e\n\u003cli\u003ePower with 9-12VDC (recommended)\u003c\/li\u003e\n\u003cli\u003e16:10 display ratio\u003c\/li\u003e\n\u003cli\u003eResolution: 1280 x 800\u003c\/li\u003e\n\u003cli\u003eBrightness: 350cd\/m2\u003c\/li\u003e\n\u003cli\u003eContrast: 800:1\u003c\/li\u003e\n\u003cli\u003eWe ship with a an HSD101PWW1 display, or equivalent\u003c\/li\u003e\n\u003cli\u003eNot HDCP compatible - it cannot be used with 'secured' HDMI sources\u003c\/li\u003e\n\u003cli\u003eVisible area: 217mm x 135mm 16:10\u003c\/li\u003e\n\u003cli\u003eScreen dimensions: 220mm x 139mm \/ 8.7\" x 5.5\"\u003c\/li\u003e\n\u003cli\u003eDimensions with frame: 229mm x 149mm \/ 9.02\" x 5.87\"\u003c\/li\u003e\n\u003cli\u003eThickness: 5mm \/ 0.2\"\u003c\/li\u003e\n\u003cli\u003eMounting Tab Lengths: 5.9mm \/ 0.23\"\u003c\/li\u003e\n\u003cli\u003eMounting Tab Hole Diameter: range between 2.1mm - 2.9mm \/ 0.08\" - 0.11\"\u003c\/li\u003e\n\u003cli\u003eBottom Mounting Hole Distance: 62mm \/ 2.4\"\u003c\/li\u003e\n\u003cli\u003eTop Mounting Hole Distance: 87mm \/ 3.4\"\u003c\/li\u003e\n\u003cli\u003eRight Side Mounting Hole Distance (closer hole): 125mm \/ 4.9\"\u003c\/li\u003e\n\u003cli\u003eRight Side Mounting Hole Distance (further hole): 130mm \/ 5.1\"\u003c\/li\u003e\n\u003cli\u003eLeft Side Mounting Hole Distance (closer hole): 118mm \/ 4.6\"\u003c\/li\u003e\n\u003cli\u003eLeft Side Mounting Hole Distance (further hole): 124mm \/ 4.9\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower draw from combined display+HDMI driver when backlight is on\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5V: 980mA (not recommended, sometimes doesn't work @ 5V)\u003c\/li\u003e\n\u003cli\u003e6V: 780mA\u003c\/li\u003e\n\u003cli\u003e7V: 660mA\u003c\/li\u003e\n\u003cli\u003e8V: 575mA\u003c\/li\u003e\n\u003cli\u003e9V: 515mA\u003c\/li\u003e\n\u003cli\u003e10V: 450mA\u003c\/li\u003e\n\u003cli\u003e11V: 415mA\u003c\/li\u003e\n\u003cli\u003e12V: 380mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375124893753,"sku":"kof1787257135190","price":103.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/hdmi-4-pi---101-display-1280x800-ips---hdmivgantscpal-discontinued_1.jpg?v=1787257143"},{"product_id":"adafruit-27-tri-color-eink-epaper-display-with-sram-red-black-white","title":"Adafruit 2.7\" Tri-Color eInk \/ ePaper Display with SRAM (Red Black White)","description":"\u003cp\u003eEasy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe've liked these displays for a long time, but breakouts were never designed for makers to use. Finally, we decided to make our own!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis breakout has a 2.7\" tri-color (red, black, and white) display. It has 264x176 black and red ink pixels and a white-ish background. Using our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 264 x 176 pixels x 2 colors = 11.5 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 12KB?\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSo we did you a favor and tossed a small SRAM chip on the back. This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! You can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor ultra-low power usages, the onboard 3.3V regulator has the Enable pin brought out so you can shut down the power to the SRAM, MicroSD, and display.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Everything is 3 or 5V logic safe so you can use it with any and all microcontrollers.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eComes assembled and tested, with some header. You'll need a soldering iron to attach the header for breadboarding or installing into your project.\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of November 30th, 2023\u003c\/strong\u003e – we've updated this eInk breakout to EK79686 chipset - previously we were using the IL91874 chipset. We've also revise the PCB with an EYESPI connector to make cabling easier with an 18-pin FPC. We also used Adafruit Pinguin to make a lovely silkscreen. The board is otherwise the same size, pinout, and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/E0_pR_ordNo?si=9N4oZqzoeTZBpdxl\u0026amp;start=19\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 72.5mm x 56.7mm x 5.3mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 22.5g\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375171489849,"sku":"iyl1787257878552","price":20.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-27-tri-color-eink-epaper-display-with-sram-red-black-white_1.jpg?v=1787257887"},{"product_id":"adafruit-213-monochrome-eink-epaper-display-with-sram-250x122-monochrome","title":"Adafruit 2.13\" Monochrome eInk \/ ePaper Display with SRAM (250x122 Monochrome)","description":"\u003cp\u003eEasy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a monochromatic eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\u003cp\u003eWe've liked these displays for a long time, but breakouts were never designed for makers to use. Finally, we decided to make our own!\u003c\/p\u003e\u003cp\u003eThis breakout as a \u003cstrong\u003e2.13\" monochrome (black and white) display\u003c\/strong\u003e. It's\u003cstrong\u003e higher resolution than our 2.13\" Tri-Color display with 250x122 black pixels\u003c\/strong\u003e on a white-ish background. The monochrome displays also take a lot less time to update, only a couple seconds instead of 15 seconds!\u003c\/p\u003e\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 250 x 122 pixels x 2 colors = 7.6 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 8KB?\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSo we did you a favor and tossed a small SRAM chip on the back.\u003c\/strong\u003e This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003c\/p\u003e\u003cp\u003eFor ultra-low power usages, the onboard 3.3V regulator has the Enable pin brought out so you can shut down the power to the SRAM, MicroSD and display.\u003c\/p\u003e\u003cp\u003eWe even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Everything is 3 or 5V logic safe so you can use it with any and all microcontrollers.\u003c\/p\u003e\u003cp\u003eComes assembled and tested, with some header. You'll need a soldering iron to attach the header for breadboarding or installing into your project.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eProduct Dimensions: 61.5mm x 39.3mm x 5.3mm \/ 2.4\" x 1.5\" x 0.2\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 13.5g \/ 0.5oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375171522617,"sku":"msf1787257879201","price":15.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-213-monochrome-eink-epaper-display-with-sram-250x122-monochrome_1.jpg?v=1787257888"},{"product_id":"adafruit-154-monochrome-eink-epaper-display-with-sram-200x200-with-ssd1608","title":"Adafruit 1.54\" Monochrome eInk \/ ePaper Display with SRAM (200x200 with SSD1608)","description":"\u003cp\u003eEasy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add an eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe've liked these displays for a long time, but breakouts were never designed for makers to use. Finally, we decided to make our own!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe breakout sports a 1.54\" monochrome (black and white) display. It's a higher resolution than our 1.54\" Tri-Color display with 200x200 black pixels on a white-ish background. The monochrome displays also take a lot less time to update, only a couple of seconds instead of 15 seconds!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 200 x 200 pixels = 8 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 8KB?\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSo we did you a favor and tossed a small SRAM chip on the back. This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! You can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor ultra-low power usages, the onboard 3.3V regulator has the Enable pin brought out so you can shut down the power to the SRAM and display. We even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Everything is 3 or 5V logic safe so you can use it with any and all microcontrollers.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eComes assembled and tested, with some header. You'll need a soldering iron to attach the header for breadboarding or installing it into your project.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis display breakout also features an 18-pin \"EYESPI\" standard FPC connector with flip-top connector. You can use an 18-pin 0.5mm pitch FPC cable to connect to all the GPIO pins for when you want to skip the soldering.\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of March 18, 2024\u003c\/strong\u003e – We've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen. There is also the new EYESPI connector, which makes cabling easier with an 18-pin FPC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of June 7, 2021\u003c\/strong\u003e we're selling a version with SSD1681 chipset, instead of the SSD1608 chipset. Firmware code will need to be updated as they are not code compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/MhCSSRPGCy4?si=B7Hfkz9qx7cZX5QX\u0026amp;start=156\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOverall dimension: 43.5mm x 43mm x 4.8mm\u003c\/li\u003e\n\u003cli\u003e4 x 0.1\" \/ 2.5mm mounting holes in corners\u003c\/li\u003e\n\u003cli\u003eDisplay size: 28mm x 28mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1g\u003c\/li\u003e\n\u003cli\u003eUses SSD1681 chipset for driving E-Ink display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary Guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375171620921,"sku":"mjn1787257880598","price":17.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-154-monochrome-eink-epaper-display-with-sram-200x200-with-ssd1608_1.jpg?v=1787257889"},{"product_id":"adafruit-eink-breakout-friend-with-32kb-sram","title":"Adafruit eInk Breakout Friend with 32KB SRAM","description":"\u003cp\u003eAdd some bi-stability to your life with an \u003cstrong\u003eAdafruit EInk Breakout Friend\u003c\/strong\u003e - your fun pal who's happy to lend a hand when you want to work with EInk\/E-Paper displays. Luckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This breakout will add all the power supply support circuitry and level shifting so you can attach your favorite display (up to tri-color 4.2\") and wire it up to your favorite development board.\u003c\/p\u003e\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But...just about all EInk displays are write-only and many only let you update the full display (not partial update). That means you have to buffer the full image you want to display, taking up precious RAM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Eink Friend is much friendlier - it comes with  256 Kilobit (32 Kilobyte) SRAM chip. \u003c\/strong\u003eThat means you can control up to a 4.2\" 300x400 tri-color display (300*400 * 2 colors \/ 8 bits-per-byte = 30KB).  This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display. If you prefer not to use the chip, our libraries will automatically use the microcontroller\/microcomputer internal RAM.\u003c\/p\u003e\u003cp\u003eFor ultra-low power usages, the onboard 3.3V regulator has the Enable pin brought out so you can shut down the power to the SRAM and display. By default the RESE resistor is set to 0.5 ohms, which is the most common value, but by cutting\/soldering the bottom solder jumper you can set the resistor to 3 ohms.\u003c\/p\u003e\u003cp\u003eComes assembled and tested, with some header. You'll need a soldering iron to attach the header for breadboarding or installing into your project. \u003cstrong\u003eDoes not come with an EInk display!\u003c\/strong\u003e For use with just about any EInk display that has a 24-pin FPC connector. See these schematics to verify that your display matches before purchasing.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eProduct Dimensions: 34.7mm x 21.5mm x 3.5mm \/ 1.4\" x 0.8\" x 0.1\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 3.4g \/ 0.1oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375171686457,"sku":"tgb1787257881571","price":5.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-eink-breakout-friend-with-32kb-sram_1.jpg?v=1787257890"},{"product_id":"adafruit-213-monochrome-eink-epaper-display-featherwing-250x122-monochrome-with-ssd1675","title":"Adafruit 2.13\" Monochrome eInk \/ ePaper Display FeatherWing (250x122 Monochrome with SSD1675)","description":"\u003cp\u003eEasy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\u003cp\u003eWe've liked these displays for a long time, and they're just about Feather sized, so wouldn't a custom e-paper FeatherWing make a ton of sense?\u003cstrong\u003e This 'Wing is tested to work with \u003cem\u003eall\u003c\/em\u003e of our Feathers\u003c\/strong\u003e, from the ESP8266 to the M0. It has built in memory buffering so it can work with chips as small as the '32u4 and '328. It \u003cem\u003edoes\u003c\/em\u003e use a lot of pins: the 3 SPI pins, and up to 4 control pins to manage the SD card slot and SRAM.\u003c\/p\u003e\u003cp\u003eThe FeatherWing sports a \u003cstrong\u003e2.13\" monochrome (black and white) display\u003c\/strong\u003e. It's\u003cstrong\u003e higher resolution than our 2.13\" Tri-Color display with 250x122 black pixels\u003c\/strong\u003e on a white-ish background. The monochrome displays also take a lot less time to update, only a couple seconds instead of 15 seconds!\u003c\/p\u003e\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 250 x 122 pixels x 2 colors = 7.6 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 8KB?\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSo we did you a favor and tossed a small SRAM chip on the back.\u003c\/strong\u003e This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003c\/p\u003e\u003cp\u003eWe even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Comes assembled and tested with socket headers that you can plug your Feather right into, no soldering required!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eUses SSD1675 chipset for driving E-Ink display\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eAs of Feb 25, 2020 we're selling a version with a slight fix where the A5 pin was not connected to both sides of the 2x16 header\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 61.3mm x 40.2mm x 6.7mm \/ 2.4\" x 1.6\" x 0.3\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 13.8g \/ 0.5oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375171751993,"sku":"fgg1787257882609","price":13.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-213-monochrome-eink-epaper-display-featherwing-250x122-monochrome-with-_1.jpg?v=1787257891"},{"product_id":"213-flexible-monochrome-eink-epaper-display-212x104-monochrome-discontinued","title":"2.13\" Flexible Monochrome eInk \/ ePaper Display (212x104 Monochrome) [Discontinued]","description":"\u003cp\u003eWoah, the cyber-future is here! Flexible E-Ink has been demo'd at high tech events for years but now you can actually get your paws on it. This display is true E-Ink \/ E-Paper, once an image is displayed it will stay even once you remove all power. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\u003cp\u003eThis flexible display sports a \u003cstrong\u003e2.13\" monochrome (black and white) display\u003c\/strong\u003e. It has 212x104 black ink pixels on a white-ish background. This is the same resolution as the 2.13\" Tri-Color display, but doesn't have a red ink layer. The monochrome displays also take a lot less time to update, only a couple seconds instead of 15 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note: this display is \u003cem\u003eflexible\u003c\/em\u003e but that doesn't mean you can constantly flex it. The video above showing a hand twisting the display is a looped demo\u003c\/strong\u003e,\u003cstrong\u003e not an instructional video. \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese displays should not be flexed\/moved\u003cem\u003e during\u003c\/em\u003e a display update, you'll get odd effects.\u003c\/li\u003e\n\u003cli\u003eContinuously flexing it will eventually damage the display.\u003c\/li\u003e\n\u003cli\u003eThere's no specification for how many times it can be flexed, so keep it minimal!\u003c\/li\u003e\n\u003cli\u003eWe recommend affixing the display to a stable backing to reduce stresses. E.g. it can be attached to a stiff curved bracelet to make a watch.\u003c\/li\u003e\n\u003cli\u003eDon't flex where the orange connector cable meets the eInk display - the chip is very delicate and you could crack the connections\u003c\/li\u003e\n\u003cli\u003eYou can flex the orange connector cable a few times, its made of flex PCB with a 2-3mm radius.\u003c\/li\u003e\n\u003cli\u003eYou can flex the eInk display with, perhaps, a 10mm radius... this isn't documented, just experimental!\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 212 x 104 pixels = 2.5 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 2.5KB?\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003c\/p\u003e\u003cp\u003eNote: This is \u003cem\u003ejust\u003c\/em\u003e the display. You'll want your own eInk Breakout Friend too!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\u003cli\u003eDimensions (excluding ribbon cable): 60 x 30 x 0.2mm\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 0.1g \/ 0.0oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\nDatasheet \u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375171784761,"sku":"llk1787257883551","price":11.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/213-flexible-monochrome-eink-epaper-display-212x104-monochrome-discontinued_1.jpg?v=1787257892"},{"product_id":"29-flexible-monochrome-eink-epaper-display-296x128-monochrome","title":"2.9\" Flexible Monochrome eInk \/ ePaper Display (296x128 Monochrome)","description":"\u003cp\u003eWoah, the cyber-future is here! Flexible E-Ink has been demo'd at high tech events for years but now you can actually get your paws on it. This display is true E-Ink \/ E-Paper, once an image is displayed it will stay even once you remove all power. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\u003cp\u003eThis flexible display sports a \u003cstrong\u003e2.9\" monochrome (black and white) display\u003c\/strong\u003e. It has 296x128 black ink pixels on a white-ish background. The monochrome displays also take a lot less time to update, only a couple seconds instead of 15 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note: this display is \u003cem\u003eflexible\u003c\/em\u003e but that doesn't mean you can constantly flex it. \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese displays should not be flexed\/moved\u003cem\u003e during\u003c\/em\u003e a display update, you'll get odd effects.\u003c\/li\u003e\n\u003cli\u003eContinuously flexing it will eventually damage the display.\u003c\/li\u003e\n\u003cli\u003eThere's no specification for how many times it can be flexed, so keep it minimal!\u003c\/li\u003e\n\u003cli\u003eWe recommend affixing the display to a stable backing to reduce stresses. E.g. it can be attached to a stiff curved bracelet to make a watch.\u003c\/li\u003e\n\u003cli\u003eDon't flex where the orange connector cable meets the eInk display - the chip is very delicate and you could crack the connections\u003c\/li\u003e\n\u003cli\u003eYou can flex the orange connector cable a few times, its made of flex PCB with a 2-3mm radius.\u003c\/li\u003e\n\u003cli\u003eYou can flex the eInk display with, perhaps, a 10mm radius... this isn't documented, just experimental!\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 296 x 128 pixels = 4.7 KBytes. Which won't fit into many microcontroller memories. Heck, even if you do have 32KB of RAM, why waste 5KB?\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe library we wrote does all the work for you\u003c\/strong\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display.\u003c\/p\u003e\u003cp\u003eNote: This is \u003cem\u003ejust\u003c\/em\u003e the display. You'll want your own eInk Breakout Friend too!\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\u003cli\u003eDimensions (excluding ribbon cable): 80 x 37 x 0.25mm\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375171883065,"sku":"ybd1787257885069","price":17.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/29-flexible-monochrome-eink-epaper-display-296x128-monochrome_1.jpg?v=1787257893"},{"product_id":"sparkfun-16x2-serlcd-rgb-text-qwiic","title":"SparkFun 16x2 SerLCD - RGB Text (Qwiic)","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"description-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eThe SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost-effective solution for adding a 16x2 RGB on Black Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now communicate in three different ways: serial, I\u003csup\u003e2\u003c\/sup\u003eC, and SPI. This comes equipped with a Qwiic connector, bringing serial LCDs into the Qwiic ecosystem. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.\u003c\/p\u003e\n\u003cp\u003eThe on-board ATmega328P AVR microcontroller utilizes 11.0592 MHz crystal for greater communication accuracy with adjustable baud rates of 1200 through 1000000 but is default set at 9600. The firmware for this SerLCD is fully open-source and allows for any customizations you may need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Since the SerLCD is a 3.3V device, please make sure you convert to 3.3V logic depending on your chosen microcontroller or single-board computer. Otherwise, you may risk damaging your board.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Sparkfun SERLCD Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/vyjXRYAXahY?si=yGI8Id6K6rl3keww\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"features-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e16x2, RGB on Black Display\u003c\/li\u003e\n\u003cli\u003eThe AVR ATMega328p (with Arduino-compatible bootloader) is populated on the back of each LCD screen and handles all of the LCD control\u003c\/li\u003e\n\u003cli\u003eThree communication options: Serial, I\u003csup\u003e2\u003c\/sup\u003eC and SPI\u003c\/li\u003e\n\u003cli\u003eAdjustable I\u003csup\u003e2\u003c\/sup\u003eC address controlled via software special commands (0x72 default)\u003c\/li\u003e\n\u003cli\u003eQwiic connection\u003c\/li\u003e\n\u003cli\u003eEmergency reset to factory settings (Jumper RX to GND on bootup)\u003c\/li\u003e\n\u003cli\u003eOperational backspace character\u003c\/li\u003e\n\u003cli\u003eIncoming buffer stores up to 80 characters\u003c\/li\u003e\n\u003cli\u003ePulse width modulation of backlight allows direct control of backlight brightness and current consumption\u003c\/li\u003e\n\u003cli\u003ePulse width modulation of contrast allows for software-defined contrast amount.\u003c\/li\u003e\n\u003cli\u003eUser-definable splash screen\u003c\/li\u003e\n\u003cli\u003eOpen-sourced firmware and Arduino-compatible bootloader enables updates via the Arduino IDE\u003c\/li\u003e\n\u003cli\u003eDimensions (LxWxH): 80.02x36.13x14.27mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.0779 oz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"documents-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eFirmware Hex File\u003c\/li\u003e\n\u003cli\u003eGitHub Firmware Repo\u003c\/li\u003e\n\u003cli\u003e\nDimensional Drawings (PDF) and PNG image\n\u003c\/li\u003e\n\u003cli\u003ePython Support (Qwiic_Py)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":46375212580921,"sku":"mqd1787258267740","price":22.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/sparkfun-16x2-serlcd---rgb-text-qwiic_1.jpg?v=1787258276"},{"product_id":"13-ips-lcd-display-module-240x240","title":"1.3\" IPS LCD Display Module (240x240)","description":"\u003cp\u003eThis 1.3\" IPS LCD module from Waveshare is a great way to add a mini high-quality display to your project.\u003c\/p\u003e \u003cp\u003eThe display has a 240x240 HD resolution and offers 65K RGB colours via its IPS display. The module is controlled via a simple SPI connection thanks to the embedded ST7789 driver.\u003c\/p\u003e \u003cp\u003eThe handy mounting holes make it easy to incorporate into a custom panel or 3D printed enclosure, and the online development resources make it easy to get up and running on a Raspberry Pi or Arduino board.\u003c\/p\u003e \u003cp\u003eA PH2.0 20cm 8-pin cable is included in the package.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1.3\" IPS LCD Display\u003c\/li\u003e \u003cli\u003e240×240 HD resolution\u003c\/li\u003e \u003cli\u003e65K RGB colours\u003c\/li\u003e \u003cli\u003eClear and colourful display\u003c\/li\u003e \u003cli\u003eSPI interface minimizes required IO pins\u003c\/li\u003e \u003cli\u003eSupports controller boards such as Raspberry Pi and Arduino\u003c\/li\u003e \u003cli\u003e\nOnline development resources (examples for Raspberry Pi\/Arduino)\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x 1.3\" LCD Module\u003c\/li\u003e \u003cli\u003e1x PH2.0 20cm 8-pin cable\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eProduct Wiki\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eTech Specs\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eOperating voltage: 3.3V\u003c\/li\u003e \u003cli\u003eInterface: SPI\u003c\/li\u003e \u003cli\u003eLCD type: IPS\u003c\/li\u003e \u003cli\u003eDriver: ST7789\u003c\/li\u003e \u003cli\u003eResolution: 240x240\u003c\/li\u003e \u003cli\u003eDisplay colour: RGB, 65K colour\u003c\/li\u003e \u003cli\u003eBacklight: LED\u003c\/li\u003e \u003cli\u003eDimensions: 45mm x 31mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":46375212613689,"sku":"mlz1787258268308","price":6.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/13-ips-lcd-display-module-240x240_1.jpg?v=1787258277"}],"url":"https:\/\/myoutfitstore.shop\/collections\/lcds-displays.oembed","provider":"My Store","version":"1.0","type":"link"}