{"title":"NeoPixels","description":"\u003cp\u003eBrowse our NeoPixels collection. Best Price.\u003c\/p\u003e","products":[{"product_id":"adafruit-neopixel-digital-rgb-led-strip-1m-white-60-led-discontinued","title":"Adafruit NeoPixel Digital RGB LED Strip - 1m White 60 LED [Discontinued]","description":"\u003cp\u003eYou thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! You wanted \u003cstrong\u003etwice the LEDs\u003c\/strong\u003e? We got it (well, its 1.875 times as many but that's within a margin of error). You wanted \u003cstrong\u003ethinner strips\u003c\/strong\u003e? Now only 12.5 mm wide, 10 mm if you remove the strip from the casing. You wanted \u003cstrong\u003eless noticeable strip color\u003c\/strong\u003e - this strip has white-colored flex PCB, which will be less visible against white-painted walls. \u003cstrong\u003eThis is the strip with white flex PCB, its identical to the black 60 LED\/meter except it has a different color mask on the flex strip\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAll your dreams answered, yet there are a few things to watch for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFirst up, the higher density means much higher power usage over a certain distance - 18 Watts max (~3.5 Amps @ 5V) per meter instead of 9.6 Watts max (~2 Amps @ 5V). The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1\/3 to 1\/2 the max current. A good power supply such as our 5V 10A supply is key!\u003c\/li\u003e\n\u003cli\u003eSecond, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. We have example code for using with the Arduino Uno\/Mega microcontroller at 8MHz and 16MHz, and with a little effort you can use with the Raspberry Pi, or Beagle Bone Black, but it will not work with the Basic Stamp, NETduino, any other interpreted\/virtual machine microprocessor or any processor slower than 8 MHz. For those processors, check our DotStar digital LED strip which has SPI-like input\/output and works easily with Pi, NETduino, and other processors.\u003c\/li\u003e\n\u003cli\u003eThird, just because you have all those pixels doesn't mean you have the RAM for it - the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 1500 bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, use a Mega.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese LED strips are even more fun and glowy. There are 60 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.\u003cbr\u003e\u003cbr\u003eThe strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.65\"\/1.7cm (1 LED each). Solder to the 0.1\" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V\/2A supply that should be able to drive 1 meter (depending on use) and a 5V\/10A supply that can drive up to 4 meters (depending on use) \u003cstrong\u003eYou must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThese strips are\u003c\/strong\u003e \u003cstrong\u003esold in 1m strips only\u003c\/strong\u003e! If you buy multiple units at a time, you'll get multiple individual 1m strips!\u003cbr\u003e\u003cbr\u003eTo wire up these strips we suggest picking up a 2.1mm DC jack to wire in so you can connect one of our wall adapters to power it. For the data + ground pins, you can pick up 2-pin JST set to turn it into a quick connection.\u003cbr\u003e\u003cbr\u003eOur detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library \u0026amp; example code for the Arduino UNO\/Duemilanove\/Diecimila, Flora\/Micro\/Leonardo, Trinket\/Gemma, Arduino Due \u0026amp; Arduino Mega\/ADK (all versions)\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12.5mm (0.5\") wide\u003c\/strong\u003e, 4mm (0.16\") thick with casing on, 16.7mm (0.65\") long per segment\u003c\/li\u003e\n\u003cli\u003eWeight of 1 meter (w\/ silicone jacket and 6\" leads): 39g\u003c\/li\u003e\n\u003cli\u003e60 LEDs per meter\u003c\/li\u003e\n\u003cli\u003eRemovable IP65 weatherproof casing\u003c\/li\u003e\n\u003cli\u003eMaximum 5V @ 60mA draw per 0.65\" strip segment (all LEDs on full brightness)\u003c\/li\u003e\n\u003cli\u003e5VDC power requirement (do not exceed 6VDC) - no polarity protection\u003c\/li\u003e\n\u003cli\u003e1 integrated RGB LEDs per segment, individually controllable\u003c\/li\u003e\n\u003cli\u003eLED wavelengths: 630nm\/530nm\/475nm\u003c\/li\u003e\n\u003cli\u003eConnector: 2-pin JST SM\n\u003c\/li\u003e\n\u003cli\u003eWS2812 Datasheet\u003c\/li\u003e\n\u003cli\u003eSK6812 Datasheet\u003c\/li\u003e\n\u003cli\u003eMay ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375124041785,"sku":"vov1787257114408","price":11.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-neopixel-digital-rgb-led-strip---1m-white-60-led-discontinued_1.jpg?v=1787257122"},{"product_id":"breadboard-friendly-rgb-smart-neopixel-pack-of-5","title":"Breadboard-friendly RGB Smart NeoPixel - Pack of 5","description":"\u003cp\u003eThis is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard-friendly, with two rows of 3 x 0.1\" spaced headers on each side for easy soldering, chaining and breadboarding. These ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable - so you only need 1 pin\/wire to control as many LEDs as you like.\u003c\/p\u003e\n\u003cp\u003eThese pixels have full 24-bit colour ability with PWM taken care of by the controller chip. Since the LED is so bright, you need less current\/power to get the effects you want. The driver is constant current so it's OK if your battery power changes or fluctuates a little.\u003c\/p\u003e\n\u003cp\u003eEach pixel draws as much as 60mA (all three RGB LEDs on for full brightness white). An Arduino can drive up to 500 pixels at 30 FPS (it will run out of RAM after that). Using ribbon cable you can string these up to 6\" apart (after that, you might get power droops and data corruption)\u003c\/p\u003e\n\u003cp\u003eEach order comes with 5 \u003cspan\u003e(used to be 4)\u003c\/span\u003e individually controllable pixels. In the photos above we show the pixels with headers soldered on, but the pixels \u003cstrong\u003edo not\u003c\/strong\u003e come with any headers. You can pick up some in the shop if you need\u003c\/p\u003e\n\u003cp\u003eOur detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library \u0026amp; example code for the Arduino UNO\/Duemilanove\/Diecimila, Flora\/Micro\/Leonardo, Trinket\/Gemma, Arduino Due \u0026amp; Arduino Mega\/ADK (all versions)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Breadboard and cables are \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of September 5th, 2024\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- We are no longer able to get the old 9V-compatible WS2812S chips, this now comes with the SK6812 which is 5V max, but it's a better LED overall and doesn't have power-up flashes and is less sensitive to input level voltages. We now include 5 rather than 4 breakouts! We also updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 0.4\" x 0.5\" x 0.1\" \/ 10.2mm x 12.7mm x 2.5mm\u003c\/li\u003e\n\u003cli\u003e0.5\" (12.5mm) diameter circle PCB, 0.1\" (2.5mm) total thickness\u003c\/li\u003e\n\u003cli\u003e800 KHz speed protocol\u003c\/li\u003e\n\u003cli\u003eChainable design\u003c\/li\u003e\n\u003cli\u003e5-9VDC power (can run at 3.5V but color will be dimmed), constant current 18.5mA per LED (~55mA max total per pixel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNeoPixel Tutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375124074553,"sku":"dqi1787257114685","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/breadboard-friendly-rgb-smart-neopixel---pack-of-5_1.jpg?v=1787257123"},{"product_id":"neopixel-ring-12-x-5050-rgbw-leds-w-integrated-drivers-warm-white-3000k","title":"NeoPixel Ring - 12 x 5050 RGBW LEDs w\/ Integrated Drivers (Warm White - ~3000K)","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e12-LED RGBW NeoPixel Ring (Warm White) with individually addressable pixels, 32-bit colour control, and a dedicated white channel. Chainable, 5 V powered, and controlled from a single pin — perfect for compact, high-impact lighting projects.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eWhat’s better than smart RGB LEDs? Smart RGB + White LEDs! This 12-LED RGBW NeoPixel Ring (Warm White) adds a dedicated white LED to every pixel, giving you richer colours, cleaner whites, and far more flexible lighting effects — all arranged neatly in a circle.\u003c\/p\u003e\n\u003cp\u003eThe ring measures 1.45″ (37 mm) in outer diameter and features 12 ultra-bright, individually addressable NeoPixels. Each LED contains its own driver chip, so every pixel can be controlled independently using just one microcontroller pin. The rings are fully chainable, letting you connect multiple rings together by linking the data output of one to the input of the next.\u003c\/p\u003e\n\u003cp\u003eEach NeoPixel includes constant-current drive (~18 mA per channel), ensuring consistent colour even if the supply voltage varies. No external resistors are needed — simply power the ring from 5 V DC, and you’re good to go.\u003c\/p\u003e\n\u003cp\u003eEach pixel is “split” internally: one half provides the familiar RGB, while the other is a warm white LED with yellow phosphor. Unlit, the white element looks a bit like an egg yolk, but once powered it’s extremely bright. Brightness and colour are controlled using 8-bit PWM per channel, giving 32-bit colour control per pixel. This makes the ring ideal for smooth colour blends, warm white illumination, or combining both in a single animation.\u003c\/p\u003e\n\u003cp\u003eNeoPixels use an 800 kHz single-wire protocol, which requires accurate timing. The PWM refresh rate is around 400 Hz, which works well in most cases but can be noticeable if the LEDs are moving. For higher-speed visual applications, DotStars offer a 20 kHz PWM rate, though NeoPixels remain a great choice for most projects.\u003c\/p\u003e\n\u003cp\u003eBecause the PWM engine runs inside each LED, once you send the colour data, the ring continues driving the LEDs on its own — no constant updates required. Control data is passed along the ring using an internal shift-register design, allowing an effectively unlimited number of chained pixels.\u003c\/p\u003e\n\u003cp\u003eExtensive documentation is available, including wiring guides, power calculations, and example code. Be sure to use a NeoPixel library with RGBW support — standard RGB-only libraries will not work correctly. The Adafruit NeoPixel library fully supports RGBW devices, and the NeoPixel Überguide covers everything from basic setup to advanced animations.\u003c\/p\u003e\n\u003cp\u003eEach ring is fully assembled and tested and includes 12 individually addressable RGBW NeoPixels.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/VixZ1GFgksg?si=imNkw1VzNDLnvePI\u0026amp;start=295\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOuter diameter: 36.8mm\u003c\/li\u003e\n\u003cli\u003eInner diameter: 23.3mm\u003c\/li\u003e\n\u003cli\u003eThickness: 3.25mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3g\u003c\/li\u003e\n\u003cli\u003eMay ship with either WS2812B or SK6812-based LEDs. They are the same brightness, colour and protocol\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of November 1, 2023\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWS2812 Datasheet\u003c\/li\u003e\n\u003cli\u003eSK6812 Datasheet\u003c\/li\u003e\n\u003cli\u003eTutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x NeoPixel Ring - 12 x 5050 RGBW LEDs w\/ Integrated Drivers - Warm White - 3000K\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, colour and protocol\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375143440441,"sku":"njz1787257441120","price":6.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/neopixel-ring---12-x-5050-rgbw-leds-w-integrated-drivers-warm-white---3000k_1.jpg?v=1787257449"},{"product_id":"neopixel-ring-16-x-5050-rgbw-leds-w-integrated-drivers-warm-white-3000k","title":"NeoPixel Ring - 16 x 5050 RGBW LEDs w\/ Integrated Drivers (Warm White - ~3000K)","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e16-LED RGBW NeoPixel Ring (Warm White) with individually addressable pixels, dedicated white LEDs, and 32-bit colour control. Chainable, 5 V powered, and controlled from a single pin—perfect for circular lighting and animation projects.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eWhat’s better than smart RGB LEDs? Smart RGB + White LEDs! This 16-LED RGBW NeoPixel Ring (Warm White) adds a dedicated white LED to every pixel, delivering brighter whites and more flexible lighting effects in a neat circular layout.\u003c\/p\u003e\n\u003cp\u003eThe ring has a 1.75″ (44.5 mm) outer diameter and features 16 ultra-bright, individually addressable NeoPixels. Each LED includes its own driver chip, so every pixel can be controlled independently using just one microcontroller pin. The rings are fully chainable—simply connect the data output of one ring to the input of the next to control multiple rings from a single pin.\u003c\/p\u003e\n\u003cp\u003eEach NeoPixel provides approximately 18 mA constant current drive, ensuring consistent colour even if the supply voltage varies. No external resistors are required, keeping designs compact and simple. Power the ring from 5 V DC and it’s ready to go.\u003c\/p\u003e\n\u003cp\u003eInternally, each pixel is “split”: one half handles the familiar RGB, while the other is a warm white LED with yellow phosphor. Unlit, the white element looks a bit like an egg yolk, but once powered it’s extremely bright. Brightness and colour are controlled using 8-bit PWM per channel, giving 32-bit colour control per pixel—ideal for smooth colour blending and warm white illumination.\u003c\/p\u003e\n\u003cp\u003eNeoPixels use an 800 kHz single-wire protocol, which requires accurate timing. The PWM refresh rate is around 400 Hz, which works well for most applications but may be noticeable if the LEDs are moving. For higher-speed visual effects, DotStars offer a 20 kHz PWM rate, though NeoPixels remain an excellent choice for most projects.\u003c\/p\u003e\n\u003cp\u003eEach LED contains an embedded microcontroller and operates like a shift register, passing data from one pixel to the next. Once colour data is sent, the built-in PWM continues driving the LEDs automatically—no constant updates needed.\u003c\/p\u003e\n\u003cp\u003eComprehensive documentation is available, including wiring guides, power usage calculations, and example code. Be sure to use a NeoPixel library with RGBW support, as RGB-only libraries will not work correctly. The Adafruit NeoPixel library fully supports RGBW devices, and the NeoPixel Überguide covers everything from basic setup to advanced animations.\u003c\/p\u003e\n\u003cp\u003eEach ring ships fully assembled and tested, with 16 individually addressable RGBW NeoPixels.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOuter diameter: 44.5mm\u003c\/li\u003e\n\u003cli\u003eInner diameter: 31.75mm\u003c\/li\u003e\n\u003cli\u003eThickness: 3.25mm \/ 0.13\"\u003c\/li\u003e\n\u003cli\u003eWeight: 4.2g\u003c\/li\u003e\n\u003cli\u003eMay ship with either WS2812B or SK6812-based LEDs. They are the same brightness, colour and protocol\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of May 17, 2023\u003c\/strong\u003e - You may get a NeoPixel Jewel with either WS2812B LEDs or SKC6812 LEDs; they are the same protocol and brightness. However, the SKC are more reliable and handle accidental over-volting a little better!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWS2812 Datasheet\u003c\/li\u003e\n\u003cli\u003eSK6812 Datasheet\u003c\/li\u003e\n\u003cli\u003eTutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x NeoPixel Ring - 16 x 5050 RGBW LEDs w\/ Integrated Drivers - Warm White - 3000K\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375143571513,"sku":"rzc1787257443046","price":7.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/neopixel-ring---16-x-5050-rgbw-leds-w-integrated-drivers-warm-white---3000k_1.jpg?v=1787257451"},{"product_id":"neopixel-triple-ring-board-with-44-thru-hole-leds-66mm-diameter-discontinued","title":"NeoPixel Triple-Ring Board with 44 Thru-Hole LEDs (66mm Diameter) [Discontinued]","description":"\u003cp\u003eWhether they're rings, strips, panels, matrices, we love glowing up projects with LEDs. And here's an interesting new board! Is it half of an electronic Oreo cookie? Nay! It's a \u003cstrong\u003eNeoPixel Triple-Ring Board with Thru-Hole LEDs\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis board is dotted with 44 adorable bubble-shaped lightly-diffused 5mm NeoPixel LEDs. Use just like any NeoPixel ring or strip, power with 5V and send it WS2812\/NeoPixel signals. The signal pads on the bottom are labeled \u003cstrong\u003eDI\u003c\/strong\u003e for data input, and \u003cstrong\u003eDO\u003c\/strong\u003e for data output (to other rings).\u003c\/p\u003e\n\u003cp\u003eThe diffused LEDs have an interesting look compared to our other flat rings, and we like the multi-ring effect.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 66mm\u003c\/li\u003e\n\u003cli\u003eOverall Height: 9mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Weight: 18.4g \/ 0.6oz\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375177748537,"sku":"oyk1787257973215","price":21.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/neopixel-triple-ring-board-with-44-thru-hole-leds-66mm-diameter-discontinued_1.jpg?v=1787257981"}],"url":"https:\/\/myoutfitstore.shop\/collections\/neopixels.oembed","provider":"My Store","version":"1.0","type":"link"}