{"title":"Sensors","description":"\u003cp\u003eBrowse our Sensors collection. Free Shipping.\u003c\/p\u003e","products":[{"product_id":"barcode-readerscanner-module-ccd-camera-ps2-interface-discontinued","title":"Barcode Reader\/Scanner Module - CCD Camera - PS\/2 Interface [Discontinued]","description":"\u003cp\u003eDecode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, light, low-power module that can be easily integrated. This OEM scanner has a little camera inside that takes 100 photos per second, instead of using a 'scanning mirror' assembly. This means its less likely to get damaged or out of alignment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note: this is a camera-based not laser-based scanner\u003c\/strong\u003e - you'll have to hold it farther away than you usually do for laser-mirror scanners! Try 10cm\/4\" or more distance with the button held down.\u003cbr\u003e\u003cbr\u003eThis all in one module is the most microcontroller-friendly we could find. It is powered over 5V and instead of a USB port, it has a PS\/2 interface and acts like a 'keyboard'. In fact, its designed to be a 'pass through keyboard wedge' device for point-of-sale terminals. What's nice about PS\/2 is that it uses a single connector for power and data, and uses two data pins. When a barcode is scanned, the raw data is decoded, parity-checked and spit out as if they were typed on a keyboard.\u003cbr\u003e\u003cbr\u003eNearly all microcontrollers have existing PS\/2 keyboard examples that would work fine with this barcode scanner For Arduino users, 5:00)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e  \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance parameters - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLight source:  Visual red, wavelength 632 nm\u003cbr\u003eScan depth of field:  [email protected]\/0.5mm, PCS90%\u003cbr\u003eResolution:  5mil\/[email protected]%\u003cbr\u003eAmbient light immunity:  5000 Lux Max\u003cbr\u003eVoltage:  DC + 5V ± 5%\u003cbr\u003eOperating power consumption:  80 mAh\u003cbr\u003eRead the display state:  The buzzer sounded\u003cbr\u003eScan speed:  100 scans \/ sec ± 10%\u003cbr\u003eOperating temperature: 0 oC to 50 oC (32 oF to 122 oF)\u003cbr\u003eStorage temperature:  -20 oC to 70 oC (-4 oF to 158 oF)\u003cbr\u003eRelative temperature:  20% to 95% (non-condensing)\u003cbr\u003eShockproof design:  2000 g, 0.7 ms, 3 axes\u003cbr\u003eInterface:  Keyboard \/ serial \/ USB\u003cbr\u003eWire:  Straight line 150 cm\u003cbr\u003eInterface:  MOLEX 11P Pitch 1.25\u003cbr\u003eWeight:  About 17 grams (without wire)\u003cbr\u003ePhysical dimension:  44 mm (width) x 30 mm (length) x 19.2 mm (high)\u003c\/p\u003e\n\u003cp\u003eDownloads:\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eMCR12 Barcode Scanner Specsheet\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\nReset the scanner with this barcode \u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375123517497,"sku":"gnu1787257093784","price":45.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/barcode-readerscanner-module---ccd-camera---ps2-interface-discontinued_1.jpg?v=1787257102"},{"product_id":"am2315-encased-i2c-temperaturehumidity-sensor-discontinued","title":"AM2315 - Encased I2C Temperature\/Humidity Sensor [Discontinued]","description":"\u003cp\u003eFinally we have an I2C-interface temperature \u0026amp; humidity sensor in a nice enclosed style. This sensor contains a thermistor temperature sensor and a capacitive humidity sensor. A small microcontroller inside does the readings and provides a simple I2C interface for reading the finished \u0026amp; calibrated output data. Especially nice is that this sensor is in a rugged case with mounting bracket, which makes it way superior to a normal PCB-mounted sensor.\u003cbr\u003e\u003cbr\u003eWhile it is not rated as 'weatherproof', this sensor would do much better for sensing where there might be wind, rain, zombies, etc. than SHT PCB-breakout sensors, and the i2c interface makes it easier to interface with microcomputers that can't do the delicate timing of the DHT sensors.\u003cbr\u003e\u003cbr\u003eSimply connect the red wire to 5V power, black to ground, yellow wire to your i2c data pin, and the white wire to the i2c clock pin. You cannot change the i2c address so only one sensor per i2c bus. Two ~10Kohm pullup resistors are required for use, connect from the SDA and SCL lines to the power wire, \u003cstrong\u003ethe pullup resistors are not included!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWe don't have a detailed tutorial at this time but you can find our example library for Arduino that does temperature\/humidity readings at our github repository.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAM2315 - Encased I2C Temperature\/Humidity Sensor (3:50)\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e3.5 to 5.5V power and I\/O\u003c\/li\u003e\n\u003cli\u003e10 mA max current use during conversion (while requesting data)\u003c\/li\u003e\n\u003cli\u003eGood for 0-100% humidity readings with 2% accuracy\u003c\/li\u003e\n\u003cli\u003eGood for -20 to 80°C temperature readings ±0.1°C typical accuracy\u003c\/li\u003e\n\u003cli\u003e0.5 Hz update rate\u003c\/li\u003e\n\u003cli\u003eBody size 98mm x 16mm diameter (4\" x 0.9\" )\u003c\/li\u003e\n\u003cli\u003e4 wires 20 inches long\u003c\/li\u003e\n\u003cli\u003eWeight: 82.64g\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit address 05C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAM2315 datasheet\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383=\u0026amp;width=700\" style=\"max-width: 146px; float: left; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":46375123550265,"sku":"seo1787257096525","price":13.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/am2315---encased-i2c-temperaturehumidity-sensor-discontinued_1.jpg?v=1787257105"},{"product_id":"barcode-readerscanner-module-ccd-camera-usb-interface-discontinued","title":"Barcode Reader\/Scanner Module - CCD Camera - USB Interface [Discontinued]","description":"\u003cp\u003eDecode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, light, low-power module that can be easily integrated. This OEM scanner has a little camera inside that takes 100 photos per second, instead of using a 'scanning mirror' assembly. This means its less likely to get damaged or out of alignment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note: this is a camera-based not laser-based scanner\u003c\/strong\u003e - you'll have to hold it farther away than you usually do for laser-mirror scanners! Try 10cm\/4\" or more distance with the button held down.\u003cbr\u003e\u003cbr\u003eThis all in one module is the simplest we could find. On the end is just a USB cable, plug it into any computer (or microcomputer such as BeagleBone, Raspberry Pi, etc) and it will show up as an HID keyboard. When a barcode is scanned, the raw data is decoded, parity-checked and spit out as if they were typed on a keyboard.\u003cbr\u003e\u003cbr\u003eLike all barcode scanners, you can do some basic configuration by powering it up and 'scanning' in special barcodes in the manual. For example you can change the delay between 'typed' characters, or what the terminating character, if any, should be. Check the download tab for the printable manual. If you'd like to set up the scanner to be different than the default, print it out on plain white paper and scan each 'configuration' code. The config will be saved to non-volatile memory so you only have to do it once.\u003cbr\u003e\u003cbr\u003eThis reader will read a wide variety of barcode standards. The most common ones such as CODE39 and UPC are supported out of the box. To enable some of the rarer standards, check the manual as you may have to 'scan configure' to enable it.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eBarcode Reader\/Scanner Modules (5:00)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eLight Source: Visible Red light 632nm LED\u003c\/li\u003e\n\u003cli\u003eDepth Of Field: 230mm @ 20mil\/0.5mm, PCS90%\u003c\/li\u003e\n\u003cli\u003eResolution: 5mil\/0.127mm, PCS90%\u003c\/li\u003e\n\u003cli\u003eAmbient Light: 5000 Lux Max\u003c\/li\u003e\n\u003cli\u003eVoltage: DC +5V ±5%\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 80mA\u003c\/li\u003e\n\u003cli\u003eReading Indicator: Beeper\u003c\/li\u003e\n\u003cli\u003eScan Rate: 100 scans\/sec ±10%\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0 oC to 50 oC (32 oF to 122 oF)\u003c\/li\u003e\n\u003cli\u003eStorage Temp: -20 oC to 70 oC (-4 oF to 158 oF)\u003c\/li\u003e\n\u003cli\u003eRelative Humidity: 20% to 95%(Non-condensing)\u003c\/li\u003e\n\u003cli\u003eMechanical Shock: 2000G, 0.7ms, 3 axes\u003c\/li\u003e\n\u003cli\u003eInterface: USB HID Keyboard\u003c\/li\u003e\n\u003cli\u003eCable: Straight 5 ft.\u003c\/li\u003e\n\u003cli\u003eConnector: MOLEX 11P Pitch 1.25\u003c\/li\u003e\n\u003cli\u003eWeight: Approx. 0.56 oz(17 g)(w\/o cable)\u003c\/li\u003e\n\u003cli\u003eDimension: 44 mm W x 30 mm D x 19.2 mm H\u003c\/li\u003e\n\u003cli\u003eMounting Holes M3 thread. Distance: 34mm \/ 1.3\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\nConfiguration code \u003c\/li\u003e\n\u003cli\u003e\nMCR12 Barcode Scanner Manual \u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375123583033,"sku":"qyb1787257096688","price":52.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/barcode-readerscanner-module---ccd-camera---usb-interface-discontinued_1.jpg?v=1787257105"},{"product_id":"sht-10-mesh-protected-weather-proof-temperaturehumidity-sensor-discontinued","title":"SHT-10 Mesh-protected Weather-proof Temperature\/Humidity Sensor [Discontinued]","description":"\u003cp\u003eTake your next outdoor sensor project to the next level with a SHT-10 based temperature\/humidity sensor. The sensor includes a dual-use sensor module from Sensirion in a sintered metal mesh encasing. The casing is weatherproof and will keep water from seeping into the body of the sensor and damaging it, but allows air to pass through so that it can measure the humidity outside. While it is designed to be submersible in water, it's always best to avoid long-term (over 1 hour at a time) submersion, and it obviously would only give you temperature readings. For that, 8:52)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eBody dimensions: 14mm diameter, 50mm long\u003c\/li\u003e\n\u003cli\u003eCable length: 1 meter\u003c\/li\u003e\n\u003cli\u003eHumidity readings with 4.5% accuracy\u003c\/li\u003e\n\u003cli\u003eTemperature readings with 0.5°C accuracy\u003c\/li\u003e\n\u003cli\u003eWorking Temperature\/Humidity range: -40°C ~ 120°C, 0~100% RH\u003c\/li\u003e\n\u003cli\u003eAll other sensor specifications are in the SHT10 Datasheet\n\u003c\/li\u003e\n\u003cli\u003eSensor datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOld version with four color wires: Red = VCC (3-5VDC), Black or Green = Ground, Yellow = Clock, Blue = Data\u003cbr\u003eor\u003cbr\u003eNewer version with four color wires: Red = VCC (3-5VDC), Black = Ground, Yellow = Clock, Green = Data\u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375123615801,"sku":"dal1787257097369","price":33.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/sht-10-mesh-protected-weather-proof-temperaturehumidity-sensor-discontinued_1.jpg?v=1787257106"},{"product_id":"adafruit-veml6070-uv-index-sensor-breakout-discontinued","title":"Adafruit VEML6070 UV Index Sensor Breakout [Discontinued]","description":"\u003cp\u003eThis little sensor is a great way to add UV light sensing to any microcontroller project. The VEML6070 from Vishay has a true UV A light sensor and an I2C-controlled ADC that will take readings and integrate them for you over ~60ms to 500ms.\u003c\/p\u003e\u003cp\u003eUnlike the Si1145, this sensor will not give you UV Index readings. However, the Si1145 does UV Index approximations based on light level not true UV sensing. The VEML6070 in contrast does have a real light sensor in the UV spectrum. It's also got a much much simpler I2C interface so you can run it on the smallest microcontrollers with ease. Unlike the GUVA analog sensor, the biasing and ADC is all internal so you don't need an ADC.\u003c\/p\u003e\u003cp\u003eThis UV sensor works great with 3 or 5V power or logic, its nice and compact, and its easy to use with any I2C-capable microcontroller. Each order comes with one assembled PCB with a sensor, some handy pullup resistors, a 270K rset resistor and a small piece of header. Some light soldering is required to attach the header but its a fast task!\u003c\/p\u003e\u003cp\u003eCheck out our tutorial for details on on how to use this sensor, including files, code and assembly!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eVEML6070 Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUV spectrum sensitivity: 320-410nm (peak at 355nm)\u003c\/li\u003e\n\u003cli\u003eVoltage Supply: 2.7-5.5V\u003c\/li\u003e\n\u003cli\u003eSchematic, Datasheet, EagleCAD PCB files, and Fritzing available in the product tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 14.0mm x 13.0mm x 3.0mm \/ 0.6\" x 0.5\" x 0.1\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 0.5g \/ 0.0oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375144783929,"sku":"nyz1787257458834","price":4.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-veml6070-uv-index-sensor-breakout-discontinued_1.jpg?v=1787257467"},{"product_id":"128x64-graphic-lcd-discontinued","title":"128x64 Graphic LCD [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis is a 128x64 liquid crystal display that support Chinese character ,  English characters and even graphics, very suitable for interactive work with Arduino.\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 5V\u003c\/li\u003e\n\u003cli\u003eWith Chinese font\u003c\/li\u003e\n\u003cli\u003eBlue backlit\u003c\/li\u003e\n\u003cli\u003eController: ST7920\u003c\/li\u003e\n\u003cli\u003eSize: 93x70mm (3.7x2.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSetting Pixels for ST7920 based 128x64 LCD\u003c\/li\u003e\n\u003cli\u003eData sheet for ST7920\u003c\/li\u003e\n\u003cli\u003eArduino library v1.0 for serial mode\u003c\/li\u003e\n\u003cli\u003eArduino library v1.0 for parallel mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e128x64 Graphic LCD  x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375159103545,"sku":"jyb1787257674784","price":10.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/128x64-graphic-lcd-discontinued_1.jpg?v=1787257683"},{"product_id":"2x7a-dc-motor-driver","title":"2x7A DC Motor Driver","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e This is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. It is very considerate to own an Photo Coupler isolation for all the signals in case of that the motor's Reverse Current would interfere the control signals. Besides all, all the interfaces includes ESD (electro-static discharge) protection.\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cp\u003e\u003c\/p\u003e\n\u003cli\u003eVoltage supply: DC 7 ~ 24 V\n\u003c\/li\u003e\n\u003cli\u003eVoltage supply limit: 6.5 ~ 27 V\n\u003c\/li\u003e\n\u003cli\u003eControl signal Level (Compatible 3.3V\/5V)\n\u003c\/li\u003e\n\u003cdiv style=\"margin-left: 25px;\"\u003e\n\u003cdiv\u003e\u003cli\u003e High: DC 3.0 ~ 6.5 V\n\u003c\/li\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cli\u003e Low: DC0 ~ 0.8 V\n\u003c\/li\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cli\u003eOutput Channel: 2\n\u003c\/li\u003e\n\u003cli\u003eControl signal current: 3 ~ 11 mA (Each route)\n\u003c\/li\u003e\n\u003cli\u003eMaximum continuous operating current: 7 A\n\u003c\/li\u003e\n\u003cli\u003ePeak current: 50 A\n\u003c\/li\u003e\n\u003cli\u003eSpeed control: PWM\n\u003c\/li\u003e\n\u003cdiv style=\"margin-left: 25px;\"\u003e\u003cdiv\u003e\u003cli\u003e Minimum valid Pulse Width: 5 us\n\u003c\/li\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cli\u003eWorking Temperature: -25 ~ 85 °C\n\u003c\/li\u003e\n\u003cli\u003eMounting Hole: M3\n\u003c\/li\u003e\n\u003cli\u003eDimension (Length * Width * Height): 55 x 55(mm)\/2.165 x 2.165(in)\n\u003c\/li\u003e\n\u003cli\u003eWeight: 32g\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003eProduct WIKI\u003c\/li\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003e7A Dual DC Motor Driver x1\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":46375159169081,"sku":"awb1787257676009","price":15.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/2x7a-dc-motor-driver_1.jpg?v=1787257684"},{"product_id":"gravity-df05bb-tiltpan-kit-5kg","title":"Gravity: DF05BB Tilt\/Pan Kit (5kg)","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis DF05BB Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware and two DF05 ball bearing servos.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eWorking Voltage: 4.8-6V\u003c\/li\u003e\n\u003cli\u003eWorking current: 0.1-0.8 A\u003c\/li\u003e\n\u003cli\u003eTorque: 4.8kg-cm @ 4.8V ; 5.5kg-cm @6V\u003c\/li\u003e\n\u003cli\u003eAverage speed: 60 rpm\u003c\/li\u003e\n\u003cli\u003eRotation range: 0- 120\u003c\/li\u003e\n\u003cli\u003eWorking Temperature: 0\u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e~55\u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: 41 x 20 x 38mm\u003c\/li\u003e\n\u003cli\u003eWeight: 48g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e2x DF05BB Standard Servo\u003c\/li\u003e\n\u003cli\u003e1x Aluminum multifunction bracket\u003c\/li\u003e\n\u003cli\u003e1x Aluminum U-shape bracket\u003c\/li\u003e\n\u003cli\u003e1x Bearing cup\u003c\/li\u003e\n\u003cli\u003e1x High-quality sets of screw nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375159234617,"sku":"ymm1787257677201","price":10.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/gravity-df05bb-tiltpan-kit-5kg_1.jpg?v=1787257685"},{"product_id":"gravity-digital-led-string-lights-warm-white-for-arduino-discontinued","title":"Gravity: Digital LED String Lights (Warm White) For Arduino [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e These LED string lights are composed of a series of warm white LEDs that can be used for\u003cspan style=\"line-height: 1.42857;\"\u003e decoration or other interesting applications. Use them as outdoor string lights, string lights in your bedroom, on your patio or on a globe, even as Christmas lights.\u003c\/span\u003e Create a fading effect using PWM or power them at a fixed voltage.\u003cbr\u003e\u003cp\u003e\u003cb\u003e\u003cfont color=\"#ff9c00\"\u003eNote: Use the provided adapter to power the string to avoid risk of damage.\u003c\/font\u003e\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis item uses a Gravity interface for plug and play usage. Use an Ardiuno IO Expansion Shield for a convenient solution to connect to your Arduino. This sensor works at 3.3V, making it compatible with Raspberry Pi, Intel Edison, Intel Joule and Intel Curie. \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003c\/div\u003e \u003ch2\u003e \u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cp\u003e\u003c\/p\u003e\n\u003cli\u003eOperating Voltage: 2.5 ~ 5V (5V Recommended)\n\u003c\/li\u003e\n\u003cli\u003eLED Length: 4 meters\/40 LEDs\n\u003c\/li\u003e\n\u003cli\u003eAdapter Dimensions: 30 x 22 mm\/1.18 x 0.86\"\u003c\/li\u003e\n\u003cli\u003eWeight: 26g\u003c\/li\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003e\nProduct Wiki \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMore Documents \u003c\/li\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003eGravity: LED String Lights (Warm White) x1\n\u003c\/li\u003e\n\u003cli\u003eLED String Lights Adapter x1\n\u003c\/li\u003e\n\u003cli\u003eGravity Digital Cable x1\n\u003c\/li\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375159365689,"sku":"ngz1787257679325","price":7.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/gravity-digital-led-string-lights-warm-white-for-arduino-discontinued_1.jpg?v=1787257687"},{"product_id":"basic-16x2-character-lcd-white-on-blue-5v","title":"Basic 16x2 Character LCD - White on Blue 5V","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eStandard 16x2 character LCD display. It has a basic 16 character by 2 line display with a blue background with white characters.\u003cbr\u003e\n\u003cbr\u003e\nYou could get a compatible LCD pannel or I2C LCD backpack here.\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage:5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e16x2 Character LCD x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375159398457,"sku":"jin1787257679741","price":2.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/basic-16x2-character-lcd---white-on-blue-5v_1.jpg?v=1787257688"},{"product_id":"basic-16x2-character-lcd-black-on-yellow-5v-discontinued","title":"Basic 16x2 Character LCD - Black on Yellow 5V [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eStandard 16x2 character LCD display. It has a basic 16 character by 2 line display with a yellow background with black characters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eYou could get a compatible \u003c\/span\u003eLCD pannel\u003cspan style=\"line-height: 20.7999992370605px;\"\u003e or \u003c\/span\u003eI2C LCD backpack\u003cspan style=\"line-height: 20.7999992370605px;\"\u003e here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage:5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e16x2 Character LCD x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375159496761,"sku":"kyu1787257680577","price":6.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/basic-16x2-character-lcd---black-on-yellow-5v-discontinued_1.jpg?v=1787257689"},{"product_id":"micro-metal-gearmotor-501-discontinued","title":"Micro Metal Gearmotor 50:1 [discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis motor has a long (0.365\" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely mount the gearmotor while enclosing the exposed gears. We recommend the extended mounting bracket for wheels with recessed hubs, such as the wheel 42×19 mm.\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eMotor speed (No gearbox):13000 rpm\u003c\/li\u003e\n\u003cli\u003eGear ratio: \u003cspan style=\"line-height: 20.7999992370605px;\"\u003e50:1 \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor speed (with gearbox): 260 rpm\u003c\/li\u003e\n\u003cli\u003eRated current: 30mA @ 6V\u003c\/li\u003e\n\u003cli\u003eStall current: \u003cspan style=\"line-height: 20.7999992370605px;\"\u003e350mA \u003c\/span\u003e@ 6V\u003c\/li\u003e\n\u003cli\u003eStall torque: 0.39kg*cm @ 6V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eMicro Metal Gearmotor    x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375159595065,"sku":"xdu1787257681622","price":4.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/micro-metal-gearmotor-501-discontinued_1.jpg?v=1787257690"},{"product_id":"micro-metal-gearmotor-extended-bracket-pair","title":"Micro Metal Gearmotor Extended Bracket (Pair)","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with our 49x12 Wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eMicro motor brackets x2\u003c\/li\u003e\n\u003cli\u003eMounting screws ×4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375159660601,"sku":"owj1787257682886","price":2.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/micro-metal-gearmotor-extended-bracket-pair_1.jpg?v=1787257691"},{"product_id":"38w-dc-dc-converter-75v5a","title":"38W DC-DC Converter 7.5V@5A","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a waterproof DC-DC converter. With 12V\/24V (11-35V) DC input, it converts to \u003cspan data-mce-fragment=\"1\"\u003e7.5V@5A\u003c\/span\u003e which is an ideal supply for robots.\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof and shockproof case\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and less heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Rage: 11-35V DC\u003c\/li\u003e\n\u003cli\u003eOutput: 7.5V DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 5A\u003c\/li\u003e\n\u003cli\u003eSize: 58 X 40.5 X 22mm(2.28x1.59x0.87\")\u003c\/li\u003e\n\u003cli\u003eEfficiency: 96%\u003c\/li\u003e\n\u003cli\u003eWeight:0.09Kg\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature:80 ℃\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x 38W DC-DC Converter(FIT0168)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":46375162478649,"sku":"mxe1787257683723","price":11.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/38w-dc-dc-converter-75v5a_1.jpg?v=1787257692"},{"product_id":"45w-dc-dc-converter-9v5a-discontinued","title":"45W DC-DC Converter 9V@5A [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a waterproof DC-DC converter. With 16-36V DC input, it converts to 9V 5A which is a good supply for robots.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof and shockproof case\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and less heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Rage: 16-36V DC\u003c\/li\u003e\n\u003cli\u003eOutput: 9V DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 5A\u003c\/li\u003e\n\u003cli\u003eSize: 58 X 40.5 X 22mm(2.28x1.59x0.87\")\u003c\/li\u003e\n\u003cli\u003eEfficiency: 96%\u003c\/li\u003e\n\u003cli\u003eWeight:0.09Kg\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature:80 ℃\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e45W DC-DC Converter(FIT0169) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375162576953,"sku":"ukb1787257686097","price":7.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/45w-dc-dc-converter-9v5a-discontinued_1.jpg?v=1787257694"},{"product_id":"120w-dc-dc-converter-12v10a","title":"120W DC-DC Converter 12V@10A","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a waterproof DC-DC converter. With 15-40V DC input, it converts to \u003cspan data-mce-fragment=\"1\"\u003e12V @ 10A\u003c\/span\u003e which is an ideal supply for embedded PC and robots.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof and shockproof case\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and less heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Rage: 15-40V DC\u003c\/li\u003e\n\u003cli\u003eOutput: 12V DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 10A\u003c\/li\u003e\n\u003cli\u003eSize: 74 X 74 X 32mm (2.91x2.91x1.26\")\u003c\/li\u003e\n\u003cli\u003eEfficiency: 90%\u003c\/li\u003e\n\u003cli\u003eWeight: 0.28Kg\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature: 80 ℃\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e120W DC-DC Converter(FIT0170) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375162642489,"sku":"epa1787257687135","price":8.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/120w-dc-dc-converter-12v10a_1.jpg?v=1787257696"},{"product_id":"metal-dc-geared-motor-wencoder-12v-251rpm-18kgcm","title":"Metal DC Geared Motor w\/Encoder - 12V 251RPM 18Kg.cm","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a Gear Motor w\/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox’s output shaft. \u003cbr\u003e\n \u003c\/div\u003e\n\u003cdiv\u003eThese units have a 0.61\" long, 6 mm(0.24\")-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.\u003cbr\u003e\n \u003c\/div\u003e\n\u003cdiv\u003eThe face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61\") apart.\u003cbr\u003e\n \u003c\/div\u003e\n\u003cdiv\u003eThis motor is an ideal option for your mobile robot project.\u003cbr\u003e\n \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color:#ff0000;\"\u003eWarning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1\/8\") into the screw hole.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eGear ratio: 43.8:1\u003c\/li\u003e\n\u003cli\u003eNo-load speed: 251 + 10% RPM\u003c\/li\u003e\n\u003cli\u003eNo-load current: 350 mA\u003c\/li\u003e\n\u003cli\u003eStart Voltage: 1.0 V\u003c\/li\u003e\n\u003cli\u003eStall Torque: 18 Kg.cm\u003c\/li\u003e\n\u003cli\u003eStall Current: 7 A\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: 20 M Ω\u003c\/li\u003e\n\u003cli\u003eEncoderOperating Voltage: 5 V\u003c\/li\u003e\n\u003cli\u003eEncoder type: Hall\u003c\/li\u003e\n\u003cli\u003eEncoder Resolution: 16CPR(motor shaft)\/700CPR(gearbox shaft)\u003c\/li\u003e\n\u003cli\u003eWeight: 205g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eWiki\u003c\/li\u003e\n\u003cli\u003e\nDimensions  \u003c\/li\u003e\n\u003cli\u003eEncoder instruction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eGB37Y3530-12V-251R Gear Motor w\/Encoder  x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375162708025,"sku":"rom1787257688125","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/metal-dc-geared-motor-wencoder---12v-251rpm-18kgcm_1.jpg?v=1787257696"},{"product_id":"72w-dc-dc-converter-12v6a-discontinued","title":"72W DC-DC Converter 12V@6A [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis is a waterproof DC-DC converter. With 8-40V DC input, it converts to [email protected] which is ideal supply for embedded PC and robot power.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Range: 8 - 40 V\/DC \u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 12 V\/DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 6A\u003c\/li\u003e\n\u003cli\u003eSize: 71*73*28(mm)\/2.80inches * 2.87inches * 1.1inches)\u003c\/li\u003e\n\u003cli\u003eWaterproof ,Light compact\u003c\/li\u003e\n\u003cli\u003eSwitching mode power supply\u003c\/li\u003e\n\u003cli\u003eNon-isolated\u003c\/li\u003e\n\u003cli\u003eEfficiency: 82~88%; \u003c\/li\u003e\n\u003cli\u003eAmbient temperature at -10 ℃ ~ 45 ℃.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e72W DC-DC Converter       x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375162806329,"sku":"lcr1787257689097","price":20.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/72w-dc-dc-converter-12v6a-discontinued_1.jpg?v=1787257698"},{"product_id":"150w-dc-dc-converter-24v6a-discontinued","title":"150W DC-DC Converter 24V@6A [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a waterproof DC-DC converter. With 8-40V DC input, it converts to [email protected] which is an ideal supply for mobile robots, and motors.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Features\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof and shockproof case\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and less heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Rage: 8-40V DC \u003c\/li\u003e\n\u003cli\u003eOutput: 24V DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 6A\u003c\/li\u003e\n\u003cli\u003eSize: 74 X 74 X 32mm(2.91x2.91x1.26\")\u003c\/li\u003e\n\u003cli\u003eEfficiency: 90% \u003c\/li\u003e\n\u003cli\u003eWeight:0.28Kg\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature:80 ℃ \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e150W DC-DC Converter(FIT0171)  x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375162839097,"sku":"ptn1787257690039","price":22.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/150w-dc-dc-converter-24v6a-discontinued_1.jpg?v=1787257698"},{"product_id":"240w-dc-dc-converter-24v10a-discontinued","title":"240W DC-DC Converter 24V@10A [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a waterproof DC-DC converter. With 8-18V DC input, it converts to [email protected] which is an ideal supply for robots.\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\n\u003cb\u003eNote\u003c\/b\u003e: Input voltage of 12V or above can reach 240W. Transmission line with line diameter of 2.5 square mm or above should not be too long.\u003cbr\u003eThe power input can be supplied by battery for better effect.\u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Features\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof and shockproof case\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and less heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Rage:  8-18V DC \u003c\/li\u003e\n\u003cli\u003eOutput: 24V DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 10A(max)\u003c\/li\u003e\n\u003cli\u003eSize: 74 X 74 X 32mm(2.91x2.91x1.26\")\u003c\/li\u003e\n\u003cli\u003eEfficiency: 82%-88%\u003c\/li\u003e\n\u003cli\u003eWeight:0.28Kg\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature:80 ℃ \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e240W DC-DC Converter(FIT0172)  x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375162904633,"sku":"gjt1787257690934","price":30.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/240w-dc-dc-converter-24v10a-discontinued_1.jpg?v=1787257699"},{"product_id":"immersible-pump-watertube","title":"Immersible Pump \u0026 WaterTube","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank water. It works quietly with the sound level under 40db.\u003c\/p\u003e\n\u003cp\u003eThe pump has a filter inside as well as a suction cup which can help stick it to smooth surfaces tightly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003eNote: This pump is intended for use UNDER the water ONLY! \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #ff0000;\" color=\"#ff0000\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #000000;\"\u003e(Brown\/Red-Positive; Blue\/Black-Negative)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecifications\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 4.5~12V DC\u003c\/li\u003e\n\u003cli\u003eInterface: Brown +; Blue -\u003c\/li\u003e\n\u003cli\u003ePumping head:40-220cm\u003c\/li\u003e\n\u003cli\u003eCapacity: 100~350L\/H\u003c\/li\u003e\n\u003cli\u003ePower range: 0.5~5W\u003c\/li\u003e\n\u003cli\u003eDimensions: 38 x 38 x 29mm\u003c\/li\u003e\n\u003cli\u003eWeight: 125g\u003c\/li\u003e\n\u003cli\u003eCable length: 1m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Immersible pump\u003c\/li\u003e\n\u003cli\u003e1x Water tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375163035705,"sku":"pbx1787257692808","price":5.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/immersible-pump-watertube_1.jpg?v=1787257701"},{"product_id":"adafruit-htu21d-f-temperature-humidity-sensor-breakout-board-fully-assembled-discontinued","title":"Adafruit HTU21D-F Temperature \u0026 Humidity Sensor Breakout Board (Fully Assembled) [Discontinued]","description":"\u003cp\u003eIt's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the \u003cstrong\u003eHTU21D-F Temperature + Humidity Sensor\u003c\/strong\u003e - the best way to prove the weatherman wrong!\u003cbr\u003e\u003cbr\u003eThis I2C digital humidity sensor is an accurate and intelligent alternative to the much simpler Humidity and Temperature Sensor - SHT15 Breakout It has a typical accuracy of ±2% with an operating range that's optimized from 5% to 95% RH. Operation outside this range is still possible - just the accuracy might drop a bit. The temperature output has an accuracy of ±1°C from -30~90°C. If you're looking to measure temperature more accurately, we recommend the MCP9808 High Accuracy I2C Temperature Sensor Breakout Board.\u003cbr\u003e\u003cbr\u003eSuch a lovely chip - so we spun up a breakout board that includes the Filtered version (the white bit of plastic which is a PTFE filter to keep the sensor clean), a 3.3V regulator and I2C level shifting circuitry. This lets you use it safely with any kind of microcontroller with 3.3V-5V power or logic. \u003cstrong\u003eEach order comes with one fully assembled and tested PCB breakout with headers attached and everything.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIt's also very easy to use, thanks to our Arduino library and tutorial. Check out our tutorial for pinouts, wiring, files, etc\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eDimensions (including header): 18mm x 16mm x 11.5mm \/ 0.7\" x 0.6\" x 0.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 1.4g\u003c\/li\u003e\n\u003cli\u003eI2C 7-bit address \u003cstrong\u003e0x40\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB CAD files, datasheets, Fritzing object, etc available in the tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375169687609,"sku":"vds1787257846007","price":10.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-htu21d-f-temperature-humidity-sensor-breakout-board-fully-assembled-dis_1.jpg?v=1787257854"},{"product_id":"adt7410-high-accuracy-i2c-temperature-sensor-breakout-board","title":"ADT7410 High Accuracy I2C Temperature Sensor Breakout Board","description":"\u003cp\u003eAnalog Devices, known for their reliable and well-documented sensor chips - has a high precision and high resolution temperature sensor on the market, and we've got a breakout to make it easy to use! The Analog Devices ADT7410 gets straight to the point - it's an I2C temperature sensor, with 16-bit 0.0078°C temperature resolution and 0.5°C temperature tolerance. Wire it up to your microcontroller or single-board computer to get reliable temperature readings with ease.\u003c\/p\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003eThe ADT7410 has 2 address pins, so you can have up to 4 sensors on one I2C bus. There's also interrupt and critical-temperature alert pins. The sensor is good from 2.7V to 5.5V power and logic, for easy integration.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe've got both Arduino (C\/C++) and CircuitPython (Python 3) libraries available so you can use it with any microcontroller like Arduino, ESP8266, Metro, etc or with Raspberry Pi or other Linux computers thanks to Blinka (our CircuitPython library support helper).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTo get you going fast, we spun up a custom made PCB with the ADT7410 and some supporting circuitry such as pullup resistors and capacitors, in the STEMMA QT form factor, making them easy to interface with. The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the ADT7410 or to chain them with a wide range of other sensors and accessories using a compatible cable. QT Cable is not included, but we have a variety in the shop.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEach order comes with a fully tested and assembled breakout and some header for soldering to a PCB or breadboard. You'll be up and running in under 5 minutes!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThanks to Digi-Key and Analog Devices for sponsoring the development of this breakout board - we've made the PCB \"Digi-Key red\" in their honor!\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAs of \u003cstrong\u003eMay 18th, 2023\u003c\/strong\u003e - This board now comes in \u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e format. Functionality remains the same; physical shape has changed to make it plug-and-play, so it's much easier to use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/WxLDsQwKVpY?start=16\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch2 class=\"row\"\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWide input-voltage range: 2.7 V to 5.5 V\u003c\/li\u003e\n\u003cli\u003eUp to 16-bit temperature resolution (0.0078°C per lsb), default is 13 bits (0.0625°C per lsb).\u003c\/li\u003e\n\u003cli\u003eHighly accurate temperature tolerances:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e±0.5°C from −40°C to +105°C (2.7 V to 3.6 V)\u003c\/li\u003e\n\u003cli\u003e±0.4°C from −40°C to +105°C (3.0 V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eConfigurable I2C address allows up to four sensors on the I2C bus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOperates over I2C, so only two shared lines required\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 23.3mm x 16.5mm x 3.2mm\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375169753145,"sku":"afr1787257846974","price":4.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adt7410-high-accuracy-i2c-temperature-sensor-breakout-board_1.jpg?v=1787257855"},{"product_id":"circuit-playground-express-soil-sensor-mini-kit","title":"Circuit Playground Express Soil Sensor Mini Kit","description":"\u003cp\u003eThe thirst is real! Keep your flora (plants, not the board *wink*) happy and hydrated with the \u003cstrong\u003eCircuit Playground Express Soil Sensor Mini Kit\u003c\/strong\u003e. This kit will teach you all about how to keep your plants in good condition, by measuring the soil moisture content using a nail and alligator clip, then display red or green LEDs on the Circuit Playground Express to tell you the state of your plant\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit contains:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Circuit Playground Express\n\u003c\/li\u003e\n\u003cli\u003e1 x AAA Battery Holder with On\/Off Switch and 2-Pin JST with Belt Clip\n\u003c\/li\u003e\n\u003cli\u003e3 x Alkaline AAA Batteries\n\u003c\/li\u003e\n\u003cli\u003e1 x 38cm long Alligator Clip Test Lead \u003c\/li\u003e\n\u003cli\u003e1 x 8cm long stainless steel nail\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eCute plant friend not included! Use any planter with soil you can place the nail into.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOf course, we wouldn't leave you with a \"good luck!\" – check out our learn guide, \u003cstrong\u003eSoil Moisture Sensor Plotting with Mu and CircuitPython!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375169851449,"sku":"afy1787257848749","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/circuit-playground-express-soil-sensor-mini-kit_1.jpg?v=1787257857"},{"product_id":"sht-30-mesh-protected-weather-proof-temperaturehumidity-sensor-1m-cable","title":"SHT-30 Mesh-protected Weather-proof Temperature\/Humidity Sensor (1M Cable)","description":"\u003cp\u003eTake your next outdoor sensor project to the next level with this SHT-30 based temperature\/humidity sensor. The sensor includes a dual-use sensor module from Sensirion in a sintered metal mesh encasing. The casing is weatherproof and will keep water from seeping into the body of the sensor and damaging it, but allows air to pass through so that it can measure the humidity outside. While it is designed to be submersible in water, it's always best to avoid long-term submersion (over 1 hour at a time), and it obviously would only give you temperature readings. For that, our metal-cased temperature sensors would be better! This sensor is best for simply placing outside for exterior weather sensing.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eSHT30-D\u003c\/strong\u003e sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.\u003c\/p\u003e\u003cp\u003eThe sensor is essentially just a Sensiron SHT-30 digital sensor (much like our breakout here) with the 4 data\/power wires brought out so any SHT-3x code for a microcontroller will work. Check out the tutorial for Arduino and CircuitPython\/Python, and more!\u003c\/p\u003e\u003cp\u003eThe 1 meter long cable has four wires: Brown\/Red = VCC (3-5VDC), Black = Ground, Yellow = Clock, Green\/Blue = Data (sometimes we hear of sensors where data and clock are swapped so please try both ways)\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eSensor body dimensions: 14mm diameter, 50mm long\u003c\/li\u003e\n\u003cli\u003eCable length: approx 1 meter\u003c\/li\u003e\n\u003cli\u003eContains an SHT-30 Temperature\/Humidity sensor\u003c\/li\u003e\n\u003cli\u003eFour wires: Brown\/Red = VCC (3-5VDC), Black = Ground, Yellow = Clock, Green\/Blue = Data (sometimes we hear of sensors where data and clock are swapped so please try both ways)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":46375169884217,"sku":"zgy1787257849786","price":18.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/sht-30-mesh-protected-weather-proof-temperaturehumidity-sensor-1m-cable_1.jpg?v=1787257858"},{"product_id":"adxl343-triple-axis-accelerometer-2g4g8g16g-with-i2cspi","title":"ADXL343 - Triple-Axis Accelerometer (+-2g\/4g\/8g\/16g) with I2C\/SPI","description":"\u003cp\u003eAnalog Devices has followed up on their popular classic, the ADXL345, with this near-drop-in-replacement, the ADXL343. Like the original, this is a triple-axis accelerometer with digital I2C and SPI interface breakout. It has a wide sensitivity range and high resolution, operating with an 10 or 13-bit internal ADC. Built-in motion detection features make tap, double-tap, activity, inactivity, and free-fall detection trivial. There's two interrupt pins, and you can map any of the interrupts independently to either of them.\u003c\/p\u003e\n\u003cp\u003eThe ADXL343 is nearly identical in specifications to the ADXL345, and code written for the '345 will likely work on the '343 as-is. This new accelerometer has some nice price improvements to stay within your budget.\u003c\/p\u003e\n\u003cp\u003eThe sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. The lower range gives more resolution for slow movements, the higher range is good for high speed tracking. The ADXL343 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices.\u003cbr\u003e\u003cbr\u003eWe added an on-board 3.3V regulator and logic-level shifting circuitry, making it a perfect choice for interfacing with any 3V or 5V microcontroller or computer such as Arduino or Raspberry Pi. We've got both\u003cspan\u003e \u003c\/span\u003eArduino (C\/C++)\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003eCircuitPython (Python 3) libraries\u003cspan\u003e \u003c\/span\u003eavailable so you can use it with any microcontroller like\u003cspan\u003e \u003c\/span\u003eArduino, ESP8266, Metro, etc\u003cspan\u003e \u003c\/span\u003eor with\u003cspan\u003e \u003c\/span\u003eRaspberry Pi or other Linux computers\u003cspan\u003e \u003c\/span\u003ethanks to Blinka (our CircuitPython library support helper).\u003c\/p\u003e\n\u003cp\u003eAs if that weren't enough, we've also added SparkFun Qwiic-compatible STEMMA QT connectors for the I2C bus\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eso you don't even need to solder.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eJust wire up to your favourite micro with a plug-and-play cable to get accelerometer data ASAP. For a no-solder experience, just wire up to your favourite micro\u003cspan\u003e \u003c\/span\u003eusing a STEMMA QT adapter cable. The Stemma QT connectors also mean the ADXL can be used with our various associated accessories. QT Cable is not included, but we have a variety in the shop.\u003c\/p\u003e\n\u003cp\u003eEach order comes with a fully tested and assembled breakout and some header for soldering to a PCB or breadboard. Comes with 0.1\" standard header in case you want to use it with a breadboard or perfboard. Four 2.5mm (0.1\") mounting holes for easy attachment.You'll be up and running in under 5 minutes!\u003c\/p\u003e\n\u003cp\u003eThanks to Digi-Key\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003eAnalog Devices\u003cspan\u003e \u003c\/span\u003efor sponsoring the development of this breakout board - we've made the PCB \"Digi-Key red\" in their honour!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/pbaggKgbmZI?si=B8nrSPMTTwpyGeCV\u0026amp;start=120\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3-axis MEMs digital accelerometer\u003c\/li\u003e\n\u003cli\u003eInput voltage: 2.0-3.6 V\u003c\/li\u003e\n\u003cli\u003eUser-selectable output resolution:\n\u003cul\u003e\n\u003cli\u003e+\/- 2 g (10-bit data, or +\/- 512)\u003c\/li\u003e\n\u003cli\u003e+\/- 4 g (11-bit data, or +\/- 1024)\u003c\/li\u003e\n\u003cli\u003e+\/- 8g (12-bit data, or +\/- 2048)\u003c\/li\u003e\n\u003cli\u003e+\/- 16 g (13-bit data, or +\/- 4096)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUser-selectable data rate (0.1 .. 3200 Hz)\u003c\/li\u003e\n\u003cli\u003eHardware support for free-fall detection, tap detection, and activity\/inactivity\u003c\/li\u003e\n\u003cli\u003eHW support for both I2C and SPI, although I2C is recommended for ease of use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nProduct tutorial\n\u003cul\u003e\n\u003cli\u003eAlso includes Datasheets, EagleCAD PCB files and Fritzing objects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of May 15, 2023 \u003c\/strong\u003e– we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen. Additionally, this sensor breakout may come with black or tan STEMMA QT connectors. They work the same!\u003c\/li\u003e\n\u003cli\u003eAs of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWednesday, March 2nd, 2022\u003c\/strong\u003e, this board now comes in STEMMA QT format. Functionality and schematic remains the same, physical shape has changed to make it plug-and-play, much easier to use with no soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375169949753,"sku":"wvf1787257850543","price":3.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adxl343---triple-axis-accelerometer--2g4g8g16g-with-i2cspi_1.jpg?v=1787257859"},{"product_id":"adafruit-mcp9600-i2c-thermocouple-amplifier-k-j-t-n-s-e-b-and-r-type-t","title":"Adafruit MCP9600 I2C Thermocouple Amplifier (K, J, T, N, S, E, B and R Type T)","description":"\u003cp\u003eThermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The \u003cstrong\u003eAdafruit MCP9600\u003c\/strong\u003e does all that for you, and can be easily interfaced with any microcontroller or single-board-computer with I2C. Inside, the chip handles all the analog stuff for you, and can interface with just about any thermocouple type: K, J, T, N, S, E, B and R type are all supported! You can also set various alerts for over\/under temperature, and read the thermocouple (hot) temperature and the chip (cold) temperature. All this over common I2C\u003c\/p\u003e\u003cp\u003eThis breakout board has the chip itself, a 3.3V regulator and level shifting circuitry, all assembled and tested. Works great with 3.3V \u003cem\u003eor\u003c\/em\u003e 5V logic. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). Match it up with our 1m K-type thermocouple.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWorks with any K, J, T, N, S, E, B and R type thermocouple\u003c\/li\u003e\n\u003cli\u003eDatasheet rated for:\u003cbr\u003eK Type: -200°C to +1372°C\u003cbr\u003eJ Type: -150°C to +1200°C\u003cbr\u003eT Type: -200°C to +400°C\u003cbr\u003eN Type: -150°C to +1300°C\u003cbr\u003eE Type: -200°C to +1000°C\u003cbr\u003eS Type: +250°C to +1664°C\u003cbr\u003eB Type: +1000°C to +1800°C\u003cbr\u003eR Type: +250°C to +1664°C\u003c\/li\u003e\n\u003cli\u003eResolution of ±0.0625 °C - note that K thermocouples have about ±2°C to ±6°C accuracy\u003c\/li\u003e\n\u003cli\u003eInternal temperature reading\u003c\/li\u003e\n\u003cli\u003e3.3 to 5v power supply and logic level compliant\u003c\/li\u003e\n\u003cli\u003eI2C data connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eRevision History\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eAs of October 10, 2019 \u003c\/strong\u003ewe're shipping MCP9600's with datecodes \u003cem\u003eafter\u003c\/em\u003e 1845 so that they are not affected by the repeated-data bug mentioned in the eratta\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 24.3mm x 20.3mm x 2.6mm \/ 1.0\" x 0.8\" x 0.1\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.7g \/ 0.1oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375170048057,"sku":"jht1787257852291","price":9.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-mcp9600-i2c-thermocouple-amplifier-k-j-t-n-s-e-b-and-r-type-t_1.jpg?v=1787257861"},{"product_id":"tfmini-infrared-time-of-flight-distance-sensor-discontinued","title":"TFmini Infrared Time of Flight Distance Sensor [Discontinued]","description":"\u003cp\u003eWe've got many distance sensors, and the \u003cstrong\u003eTFmini Distance Sensor\u003c\/strong\u003e is a nice addition. This sensor bounces light off objects and returns the distance in centimeters. It's a nice compact plastic package, with \u003cstrong\u003eUART\u003c\/strong\u003e serial output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note that the company calls this a \"LiDAR\" but it is not a true LIDAR. Instead, its a time-of-flight (ToF) infrared sensor like the VL53L0X.\u003c\/strong\u003e That said, it's easy to use, and since it spits out the data directly over serial, you don't need a complex driver as long as you have a serial port available. If you're using with a computer rather than a microcontroller, you can plug this into a USB console cable and run our Python library to read sensor distance data.\u003c\/p\u003e\n\u003cp\u003eThese kinds of Time of Flight sensors are really common in robotics or UAV projects, but they can also be used for automation, interactive art, and motion sensing. Can detect 30cm to 12 meters (ideal), with ±4cm from 0.3 to 6m and ±6cm up to 12m.\u003c\/p\u003e\n\u003cp\u003eComes with a color-coded cable. Power with 5V on the red (power) and black (ground) wires. Then read data from the green TX wire, the logic level is 3.3V.\u003c\/p\u003e\n\u003cp\u003eYou can use this sensor with Arduino, or CircuitPython\/Python (for microcontrollers or Raspberry Pi) \u003c\/p\u003e\n\u003cp\u003eWe carry a large variety of distance sensors here if this fellow isn't what you're looking for.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (excluding hookup wire): 42 x 15 x 16mm (LxWxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 6g\u003c\/li\u003e\n\u003cli\u003eHookup wire length: approx 100mm\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 5V\u003c\/li\u003e\n\u003cli\u003eAverage Power: ≤120mW\u003c\/li\u003e\n\u003cli\u003eLED Peak Current: 800mA\u003c\/li\u003e\n\u003cli\u003eUART TTL Voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eBaud Rate: 115200 8N1\u003c\/li\u003e\n\u003cli\u003eMinimum Detected Object Size at 2m: 20mm\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -10℃ ~ 60℃\u003c\/li\u003e\n\u003cli\u003eOperating Wavelength: 850nm\u003c\/li\u003e\n\u003cli\u003eSignal Acceptance Angle: 2.3°\u003c\/li\u003e\n\u003cli\u003eTFMini's Github repository\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs of January 31, 2019 this item comes with a cable that has 0.1\" header tips for easy breadboarding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375170080825,"sku":"vge1787257853193","price":33.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/tfmini-infrared-time-of-flight-distance-sensor-discontinued_1.jpg?v=1787257862"},{"product_id":"adafruit-veml7700-lux-sensor-i2c-light-sensor-stemma-qt-qwiic","title":"Adafruit VEML7700 Lux Sensor - I2C Light Sensor - STEMMA QT \/ Qwiic","description":"\u003cp\u003e Vishay has a lot of light sensors out there, and this is a nice simple lux sensor that's easy to add to any microcontoller. Most light sensors just give you a number for brighter\/darker ambient lighting. The VEML7700 makes your life easier by calculating the lux, which is an SI unit for light. You'll get more consistent readings between multiple sensors because you aren't dealing with some unit-less values.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe sensor has 16-bit dynamic range for ambient light detection from 0 lux to about 120 klux with resolution down to 0.0036 lx\/ct, with software-adjustable gain and integration times.\u003cbr\u003e\u003cbr\u003eInterfacing is easy - this sensor uses plain, universal I2C. We put this sensor on a breakout board with a 3.3V regulator and logic level shifter so you can use it with 3.3V or 5V power\/logic microcontrollers. We have written libraries for Arduino (C\/C++) as well as CircuitPython (Python 3) so you can use this sensor with just about any kind of device, even a Raspberry Pi!\u003cbr\u003e\u003cbr\u003eAs if that weren't enough, we've also added SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder. Just wire up to your favorite micro with a plug-and-play cable to get lux data ASAP. For a no-solder experience, just wire up to your favorite micro, like the ESP32 V2 Feather using a STEMMA QT adapter cable. The Stemma QT connectors also mean the VEML can be used with our various associated accessories. QT Cable is not included, but we have a variety in the shop\u003cbr\u003e\u003cbr\u003eThis is Kattni's first PCB design for Adafruit, it's even signed on the back!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GWHf08bQxi0?start=357\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of November 2022, \u003c\/strong\u003ewe've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of April 11, 2022, \u003c\/strong\u003ethis board now comes in STEMMA QT format. Functionality and schematic remain the same. Physical shape has changed to make it plug-and-play, much easier to use with no soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary Guide: Adafruit VEML7700 Ambient Light Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 16.6mm x 16.5mm x 4.0mm\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.0g \/ 0.0oz\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375170146361,"sku":"ugq1787257854083","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-veml7700-lux-sensor---i2c-light-sensor---stemma-qt-qwiic_1.jpg?v=1787257863"},{"product_id":"35mm-dual-ir-emitter-3m-cable","title":"3.5mm Dual IR Emitter - 3m Cable","description":"\u003cp\u003eThis handy IR (Infrared) emitter is great for extending the range of any IR equipment with a 3.5mm fitting.\u003c\/p\u003e\n\u003cp\u003eIt's compatible with any TV, STB, DVD etc. that features an IR output in 3.5mm plug format. High quality black cable, with 3m dual IR infrared emitters and a 3.5mm male jack plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.5mm Dual IR Emitter Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTransmit IR commands to AV equipment\u003c\/li\u003e\n\u003cli\u003eSuitable for TV sets, STB, DVD, DVR, PVR, remote controls, video recorders, satellite receivers etc.\u003c\/li\u003e\n\u003cli\u003eUniversal IR extender cable with 3.5mm jack for connection\u003c\/li\u003e\n\u003cli\u003eDual emitters on a single plug\u003c\/li\u003e\n\u003cli\u003ePeaks Wave Length (?p): 940nm\u003c\/li\u003e\n\u003cli\u003eCable length: 3m\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ModMyPi","offers":[{"title":"Default Title","offer_id":46375170211897,"sku":"vni1787257855243","price":2.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/35mm-dual-ir-emitter---3m-cable_1.jpg?v=1787257864"},{"product_id":"3dbi-ads-b-1090mhz-sma-antenna-w-magnetic-base","title":"3dBi ADS-B 1090Mhz SMA Antenna w\/ Magnetic Base","description":"\u003cp\u003eThis neat little 3DBi ADS-B 1090Mhz SMA Antenna with Magnetic Base is designed to receive ADS-B data from aircraft! It features an SMA Male connecter, so it's compatible with all ADS-B receivers including FlightAware Dongles, PiAware, Mode S Beast, Radarcape, Kinetic SBS1\/SBS3, RTL Dongles, and more. It's designed to attach neatly to an internal metal surface and track planes as they drift on by.\u003c\/p\u003e\n\u003cp\u003eCustomers should be aware that ADS-B signals do not penetrate solid surfaces well, and the antenna should be placed high and next to a thin external surface e.g. a window. Don't expect this to work well through 12\" of brickwork!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 1090MHz\u003c\/li\u003e\n\u003cli\u003eGain: 3dBi (Max)\u003c\/li\u003e\n\u003cli\u003ePolarization Type: Vertical\u003c\/li\u003e\n\u003cli\u003eRated Power: 50W\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 50 Ohms nominal\u003c\/li\u003e\n\u003cli\u003eCable Length: 3M\u003c\/li\u003e\n\u003cli\u003eConnector Type: SMA Male Plug\u003c\/li\u003e\n\u003cli\u003eRod length: 17cm\u003c\/li\u003e\n\u003cli\u003eInternal Use Only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":46375170277433,"sku":"rfn1787257856443","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/3dbi-ads-b-1090mhz-sma-antenna-w-magnetic-base_1.jpg?v=1787257865"},{"product_id":"adafruit-htu31-temperature-humidity-sensor-breakout-board","title":"Adafruit HTU31 Temperature \u0026 Humidity Sensor Breakout Board","description":"\u003cp\u003eThe HTU31-D is the third generation of temperature-humidity sensors from TE - and a great follow-up to the popular HTU21-D sensor. Like the HTU21, the '31 is great for sensing temperature and humidity, with excellent specifications.\u003c\/p\u003e\n\u003cp\u003eThis I2C digital humidity sensor is an accurate and intelligent alternative to the common DHT-series sensors, at about the same price! It has a typical accuracy of ±2% at 20% to 100% relative humidity, at a temperature range of 0 to 70°C. Operation outside this range is still possible - just the accuracy might drop a bit. The temperature output has an accuracy of ±0.2°C from -0~100°C, on par with the better quality on-chip sensors we've stocked.\u003c\/p\u003e\n\u003cp\u003eThe sensor also has an on-board heater that can be controlled on and off to help evaporate condensation on the sensing element. Of course, temperature sensing will not be accurate with the heater on. Data reads come with CRC, so you can be more confident of data that is read compared to other I2C sensors.\u003c\/p\u003e\n\u003cp\u003eOther nice extras: a hardware reset pin, an address-select pin so you can have two on one I2C bus, and a thermal-isolation cut out so nearby circuitry has less effect on the readings.\u003c\/p\u003e\n\u003cp\u003eTo get you going fast, we spun up a custom made PCB in the \u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e form factor, making them easy to interface with. The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the HTU31Ds or to chain them with a wide range of other sensors and accessories using a \u003cstrong\u003ecompatible cable\u003c\/strong\u003e. QT Cable is not included, but we have a variety in the shop. You can use this sensor safely with any kind of microcontroller\/microcomputer with 3.3V-5V power or logic.\u003c\/p\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested PCB breakout and a small piece of header. You'll need to solder the header onto the PCB to use in a breadboard but it's fairly easy and takes only a few minutes even for a beginner.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eUses I2C address 0x40 or 0x41\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 25.5mm x 17.7mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1.6g \/ 0.1oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375209533497,"sku":"zrf1787258221355","price":4.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-htu31-temperature-humidity-sensor-breakout-board_1.jpg?v=1787258230"},{"product_id":"adafruit-bme688-temperature-humidity-pressure-and-gas-sensor","title":"Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor","description":"\u003cp\u003eThe long-awaited BME688 from Bosch gives you \u003cem\u003eall the environmental sensing you want\u003c\/em\u003e in one small package. This little sensor contains \u003cstrong\u003etemperature\u003c\/strong\u003e, \u003cstrong\u003ehumidity\u003c\/strong\u003e, \u003cstrong\u003ebarometric pressure,\u003c\/strong\u003e and \u003cstrong\u003eVOC gas\u003c\/strong\u003e sensing capabilities. All over SPI or I2C at a great price!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe BME688 is a 'drop in' replacement for the BME680\u003c\/strong\u003e - it adds a method of programming the gas-sensor heater for controlled odor-analysis but is otherwise the same hardware. Check out this EYE ON NPI for more details about the machine-learning system you can use to program this sensor for odor detection.\u003c\/p\u003e\n\u003cp\u003eLike the BME280 \u0026amp; BMP280, this precision sensor from Bosch can measure humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude and the pressure measurements are so good, you can also use it as an altimeter with  ±1 meter or better accuracy!\u003c\/p\u003e\n\u003cp\u003eThe BME688 takes those sensors to the next step in that it contains a small MOX sensor. The heated metal oxide changes resistance based on the volatile organic compounds (VOC) in the air, so it can be used to detect gasses \u0026amp; alcohols such as Ethanol, Alcohol, and Carbon Monoxide, and perform air quality measurements. Note it will give you one resistance value, with overall VOC content, but it cannot differentiate gasses or alcohols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note this sensor, like \u003cem\u003eall\u003c\/em\u003e VOC\/gas sensors, has variability, and to get precise measurements you will want to calibrate it against known sources!\u003c\/strong\u003e That said, for general environmental sensors, it will give you a good idea of trends and comparisons. We recommend that you run this sensor for 48 hours when you first receive it to \"burn it in\", and then 30 minutes in the desired mode every time the sensor is in use. This is because the sensitivity levels of the sensor will change during early use, and the resistance will slowly rise over time as the MOX warms up to its baseline reading.\u003c\/p\u003e\n\u003cp\u003eFor your convenience, we've pick-and-placed the sensor on a PCB with a 3.3V regulator and some level shifting, so it can be easily used with your favorite 3.3V or 5V microcontroller. All of the pins of the BME688 are available on standard 0.100”\/ 2.54mm pitch headers for use with a breadboard. Should you wish to avoid soldering, we now also include our \u003cstrong\u003eStemma QT\u003c\/strong\u003e connectors (SparkFun Qwiic compatible). \u003cstrong\u003eUsing these handy connectors you can simply plug in the sensor, no soldering required! \u003c\/strong\u003eQT Cable is not included, but we have a variety in the shop\u003c\/p\u003e\n\u003cp\u003eOur detailed tutorial will get you going with code for both \u003cstrong\u003eArduino\u003c\/strong\u003e and \u003cstrong\u003eCircuitPython\u003c\/strong\u003e, schematics, wiring diagrams, Fritzing objects, and more!\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 25.5mm x 17.6mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1.7g \/ 0.1oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375209599033,"sku":"ffu1787258222232","price":12.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-bme688---temperature-humidity-pressure-and-gas-sensor_1.jpg?v=1787258231"},{"product_id":"adafruit-mcp9808-high-accuracy-i2c-temperature-sensor-breakout","title":"Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout","description":"\u003cp\u003eThe MCP9808 digital temperature sensor is one of the more accurate\/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. With three address jumpers on the back, you can connect up to 8 to a single I2C bus without address collisions. Best of all, a wide voltage range makes it usable with 2.7V to 5.5V logic!\u003cbr\u003e\u003cbr\u003eUnlike the DS18B20, this sensor does not come in through-hole package so we placed this small sensor on a breakout board PCB for easy use. The PCB includes mounting holes, and pull down resistors for the 3 address pins. We even wrote a lovely little tutorial and library that will work with Arduino or CircuitPython. You'll be up and running in 15 minutes or less.\u003cbr\u003e\u003cbr\u003eSome quick specs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple I2C control\u003c\/li\u003e\n\u003cli\u003eUp to 8 on a single I2C bus with adjustable address pins\u003c\/li\u003e\n\u003cli\u003e0.25°C typical precision over -40°C to 125°C range (0.5°C guaranteed max from -20°C to 100°C)\u003c\/li\u003e\n\u003cli\u003e0.0625°C resolution\u003c\/li\u003e\n\u003cli\u003e2.7V to 5.5V power and logic voltage range\u003c\/li\u003e\n\u003cli\u003eOperating Current: 200 μA (typical)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo get you going fast, we spun up a custom made PCB with the MCP9808 and some supporting circuitry such as pull-up resistors and capacitors, in the \u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e form factor, making them easy to interface with. The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the MCP9808 or to chain them with a wide range of other sensors and accessories using a \u003cstrong\u003ecompatible cable\u003c\/strong\u003e. QT Cable is not included, but we have a variety in the shop.\u003c\/p\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested PCB breakout and a small piece of header. You'll need to solder the header onto the PCB to use with a solderless breadboard. but it's fairly easy and takes only a few minutes even for a beginner.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 25.4mm x 17.6mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1.6g \/ 0.1oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":46375209762873,"sku":"kvt1787258223698","price":3.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/adafruit-mcp9808-high-accuracy-i2c-temperature-sensor-breakout_1.jpg?v=1787258232"},{"product_id":"sparkfun-qwiic-ultrasonic-distance-sensor-hc-sr04","title":"SparkFun Qwiic Ultrasonic Distance Sensor - HC-SR04","description":"\u003cdiv id=\"description-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eYou may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to 400cm. The SparkFun Qwiic Ultrasonic Distance Sensor improves on the classic by adding a pair of Qwiic connectors to it, so now you can communicate over I\u003csup\u003e2\u003c\/sup\u003eC and daisy chain any other Qwiic product of your choosing.\u003c\/p\u003e\n\u003cp\u003eIf you prefer to bypass the Qwiic connector and I\u003csup\u003e2\u003c\/sup\u003eC you can also access the VCC, Trigger, Echo, and Ground pins broken out on the edge of the board. Please be aware that this ultrasonic sensor comes uncalibrated and you will need to manipulate the raw output for your specific application.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Sparkfun Qwiic Ultrasonic Distance Sensor Guide\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Ultrasonic Distance Sensor - HC-SR04\u003c\/li\u003e\n\u003cli\u003e1x Right-Angle Header - 4-pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv id=\"features-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage 3.3V\u003c\/li\u003e\n\u003cli\u003eDetecting Angle: 15 degrees\u003c\/li\u003e\n\u003cli\u003eSensor range: 2cm to 400cm\u003c\/li\u003e\n\u003cli\u003eAccuracy: 3mm\u003c\/li\u003e\n\u003cli\u003eMCU on board: STM8L051\u003c\/li\u003e\n\u003cli\u003eDefault I\u003csup\u003e2\u003c\/sup\u003eC Address: 0x00\u003c\/li\u003e\n\u003cli\u003eDimensions: 21.5 x 45.5mm\u003c\/li\u003e\n\u003cli\u003eWeight 9.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv id=\"documents-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic (PDF)\u003c\/li\u003e\n\u003cli\u003eEagle Files (ZIP)\u003c\/li\u003e\n\u003cli\u003eDatasheet (PDF)\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003e\nGithub (Eagle files and Example Code)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":46375209828409,"sku":"khs1787258224713","price":12.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/sparkfun-qwiic-ultrasonic-distance-sensor---hc-sr04_1.jpg?v=1787258233"},{"product_id":"garmin-lidar-lite-v4-led-distance-measurement-sensor-qwiic","title":"Garmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic)","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"description-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eThe LIDAR-Lite v4 Qwiic from GARMIN is a high-performance, wireless optical distance measurement sensor that doesn't require any soldering to get started. This is the ideal solution for drone, robot, IoT, or unmanned vehicle operations when space is tight and power is limited. This sensor has up to a 10 meter range, 1cm resolution, and requires 85mA during data acquisition. The user can read and write to the LIDAR-Lite v4 using the I\u003csup\u003e2\u003c\/sup\u003eC protocol; this is where the addition of the SparkFun Qwiic system really shines. The LIDAR sensor requires 5V to operate but runs on 3V3 logic. With a 5V boost circuit and an easy-to-use Qwiic connector, you can power the sensor and get distance measurements over Qwiic all with a single piece of hardware.\u003c\/p\u003e\n\u003cp\u003eThe LIDAR sensor works by sending out an infrared beam and measuring the time it takes to be reflected back. The LIDAR-Lite v4 utilizes LEDs rather than a laser for this iteration; therefore, it is inherently eye-safe under normal usage. The built-in nRF52840 microcontroller runs a pre-loaded \"out of the box\" stock application to calculate the distance between itself and something in front of it. The equipped nRF52840 also allows developers to create custom applications to expand on the \"out of the box\" functionality or connect to an external micro-controller running a custom user application.\u003c\/p\u003e\n\u003cp\u003eThe SparkFun LIDAR Lite v4 Arduino library makes getting data as easy as a call to the getDistance() function. The library also supports changing the I\u003csup\u003e2\u003c\/sup\u003eC address of each LIDAR and provides an easy example of how to do so. Its low power-consumption and I\u003csup\u003e2\u003c\/sup\u003eC address configuration means you can daisy-chain up to 10 of these sensors on one microcontroller platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The I\u003csup\u003e2\u003c\/sup\u003eC address of the Qwiic LIDAR-Lite v4 is 0x62 and is software-configurable to any address. A multiplexer\/Mux is required to communicate to multiple Qwiic LIDAR-Lite v4 sensors on a single bus. If you need to use more than one Qwiic LIDAR-Lite v4 sensor consider using the Qwiic Mux Breakout.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Garmin Lidar-Lite V4 (Qwiic) Hookup guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/pgklSqYWkaI?si=JezH8vDlX8J3t8CA\u0026amp;start=83\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"features-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eResolution: 1cm\u003c\/li\u003e\n\u003cli\u003eMeasurement repeatability:\n\u003cul\u003e\n\u003cli\u003eAs measured indoors to a 90% reflective target\u003c\/li\u003e\n\u003cli\u003e1cm is equivalent to one standard deviation\u003c\/li\u003e\n\u003cli\u003eUsing “high accuracy” mode, with averaging:\n\u003cul\u003e\n\u003cli\u003e+\/- 1cm to 2 meters\u003c\/li\u003e\n\u003cli\u003e+\/- 2cm to 4 meters\u003c\/li\u003e\n\u003cli\u003e+\/- 5cm to 10 meters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRange: 5 cm to 10 meters (as measured from back of unit)\u003c\/li\u003e\n\u003cli\u003eUpdate rate:\n\u003cul\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC = \u0026gt;200Hz typical\u003c\/li\u003e\n\u003cli\u003eANT® = up to 200Hz to a 90% target indoors at 2m in normal operating mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterface: I\u003csup\u003e2\u003c\/sup\u003eC or ANT; user configurable for SPI using the Nordic SDK\u003c\/li\u003e\n\u003cli\u003ePower (operating voltage): 3.3VDC\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20 to 60° C\u003c\/li\u003e\n\u003cli\u003eLED wavelength: 940nm\u003c\/li\u003e\n\u003cli\u003eBeam divergence: 4.77°\u003c\/li\u003e\n\u003cli\u003eOptical aperture: 14.9mm\u003c\/li\u003e\n\u003cli\u003eUnit size (LxWxH): 2.8in x 1.0in x 0.9in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"documents-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eGarmin LIDAR Lite v4 Product Information:\n\u003cul\u003e\n\u003cli\u003eGarmin: Operation Manual and Technical Specifications\u003c\/li\u003e\n\u003cli\u003eGarmin: Safety and Product Information\u003c\/li\u003e\n\u003cli\u003eGarmin: LIDAR-Lite Arduino Library Github\u003c\/li\u003e\n\u003cli\u003eGarmin: LIDAR-Lite ANT Library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSparkFun: Qwiic LIDAR Lite v4 Arduino library\u003c\/li\u003e\n\u003cli\u003eQwiic Info Page\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":46375209893945,"sku":"ssg1787258226099","price":79.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/garmin-lidar-lite-v4-led---distance-measurement-sensor-qwiic_1.jpg?v=1787258235"},{"product_id":"led-current-meter-10a-red","title":"LED Current Meter 10A (Red)","description":"\u003cp\u003eThis is a \u003cb\u003eRed \u003c\/b\u003eLED Current Meter capable of measuring and displaying current in a circuit up to 10A.\u003c\/p\u003e \u003cp\u003eIt measures 0-9.99A with 2% accuracy. Just apply four wires to your circuit and it will give you a current reading straight away.  Easy to use and a good companion to any robot project.\u003c\/p\u003e \u003cp\u003ePlease carefully follow the instructions for wiring. The power supply terminal and measurement terminal of this LED Current Meter use a common-ground connection. So, the measurement must be cascaded after loads. It's better to isolate the power supply.\u003c\/p\u003e \u003ch2\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003eMeasure Current: 0-9.99A DC\u003c\/li\u003e \u003cli\u003ePower supply voltage: 4-30V DC  \u003c\/li\u003e \u003cli\u003eDisplay mode: 3-bit 0.56 Led digital tube\u003c\/li\u003e \u003cli\u003eAccuracy:2%\u003c\/li\u003e \u003cli\u003eOpening dimension: 45.5mm*26.5mm\u003c\/li\u003e \u003cli\u003eDimension: 48mm*29mm*21mm\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch2\u003e\u003cstrong\u003eShipping List\u003c\/strong\u003e\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003e1x LED Current Meter 10A (Red)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375209959481,"sku":"ljk1787258226992","price":4.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/led-current-meter-10a-red_1.jpg?v=1787258235"},{"product_id":"magnetic-switch","title":"Magnetic Switch","description":"\u003cdiv class=\"desc\"\u003e \u003cdiv class=\"desCon\"\u003e \u003cp\u003eThis magnetic switch comprises two parts - the inducting end and trigger. The former has a reed switch enclosed inside and there is a cable connected to it, and the latter is a magnet enclosed within a plastic case. When the distance of these two parts is smaller than 1cm, the reed switch will be connected, by which the position change of an object can be detected for functions like travel controlling, position-limitation protection etc.\u003c\/p\u003e \u003cp\u003eCharacterised with reliable performance, long life-span, low power consumption, wide voltage range and high operating frequency, this magnetic switch is very applicable to harsh environments and can be used as a door\/window position limiting device, intelligent toilet, car\/electrical bike anti-theft, smart home and more.\u003c\/p\u003e \u003c\/div\u003e \u003ch2\u003eSpecification\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003eDimension: 6*14*23mm\u003c\/li\u003e \u003cli\u003eOutput Mode: NO\/NO+NC\u003c\/li\u003e \u003cli\u003ePower Voltage: 0~380VDC\/AC\u003c\/li\u003e \u003cli\u003eContact Rating: 1W\u003c\/li\u003e \u003cli\u003eLoad Current: ≤50mA\u003c\/li\u003e \u003cli\u003eOperating Temperature: -10~70℃\u003c\/li\u003e \u003cli\u003eOperating Humidity: 25~95%\u003c\/li\u003e \u003cli\u003eSwitching Frequency: 200Hz\u003c\/li\u003e \u003cli\u003eWithstand Voltage: 1000V\/AC 50\/60HZ 60S\u003c\/li\u003e \u003cli\u003eInsulation Resistance: ≥50MΩ（500VDC）\u003c\/li\u003e \u003cli\u003eWithstand Vibration: 50HZ\u003c\/li\u003e \u003cli\u003eProtection Grade: IP67\u003c\/li\u003e \u003cli\u003eEnclosure Material: PBT\/ABS\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch2\u003eShipping List\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003eMagnetic Switch x1\u003c\/li\u003e \u003cli\u003eMagnet x1\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":46375210025017,"sku":"mfv1787258228109","price":3.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/9176\/8121\/files\/magnetic-switch_1.jpg?v=1787258236"}],"url":"https:\/\/myoutfitstore.shop\/collections\/sensors.oembed","provider":"My Store","version":"1.0","type":"link"}